|
|
 |
 |
|
 |
ALL NEW RADIAL DISCHARGE NITROUS PLATE FOR EFI
Edelbrock's new radial discharge N20 plate for EFI Harleys bolts between the manifold and throttle body for easy installation, just like our current line of carbureted H-D plates. This is the first for H-D's that does not utilize a spray bar but rather sprays nitrous and fuel from the walls of the plate. It was designed this way due to EFI systems being extremely sensitive to changes within the runners. If a spray bar were present within the runner, the EFI system would need to be re-calibrated to accommodate for this runner change. This new plate design leaves the runner passage open and unobstructed to eliminate, or at least minimize, changes to the EFI systems map. Finish off your Edelbrock EFI N20 system by choosing the correct bottle and bracket combination for your application. Breather plate spacers included. Available for 2001-05 Harleys with EFI and factory Delphi throttle body. |
ORDERING AN EDELBROCK NITROUS SYSTEM IS EASY
- CHOOSE THE NITROUS KIT FOR YOUR SPECIFIC APPLICATION
Systems are available for carbureted and EFI applications
- CHOOSE YOUR PERFORMER RPM NITROUS PLATE
Edelbrock RPM Nitrous plates are available in many configurations to exactly match your induction system. Each high-quality aluminum plate is machined to exact tolerances and hard anodized for durability. All spray bars are precision EDM machined for the best possible flow characteristics. The ALL-NEW EFI plate kit is designed with a radial discharge for unobstructed airflow in EFI applications. 2004 and later models also require inductive RPM sensor #71937.
- CHOOSE YOUR BOTTLE MOUNTING BRACKETS
Edelbrock Polished Aluminum Frame brackets are available in popular frame tube diameters to mate your Edelbrock Nitrous bottle safely and securely.
|
 |
 |
PERFORMER RPM NITROUS KITS
Kits include:
- Choice of 12-oz (or) 2-Lb bottle
- N20 and Fuel Solenoids
- Aircraft-quality braided stainless lines
- N20 and Fuel fitting filters
- Stainless Steel Jets
- Instruction Sheet
| Application |
12-oz Bottle |
2-lb Bottle |
| FXR |
#71910 |
#71911 |
| Dyna |
#71912 |
#71913 |
| Softail |
#71914 |
#71915 |
| Twin Cam Dyna |
#71916 |
#71917 |
| Twin Cam Softail |
#71918 |
#71919 |
| Twin Cam Dresser |
--- |
#71924 |
| EVO Dresser |
--- |
#71922 |
| Sportster ('95-03) |
#71932 |
#71933 |
NOTE: 2004 and later Twin Cam Applications require Edelbrock Inductive RPM Sensor, p/n 71937 for tach signal pick-up |
|
|
 |
GMR TACH SIGNAL PICKUP FOR 2004 AND LATER HARLEY®
All 2004 & later H-D's get their RPM signal from the data bus, which makes it much more complicated to pick-up a tach signal---UNTIL NOW. The Edelbrock inductive RPM Sensor p/n 71937 is a simple, easy-to-install, harness that will allow you to accurately reference the engine RPM for components such as our Edelbrock Nitrous System or an aftermarket tachometer.
Part # 71937 |
|
 |
PROGRESSIVE NITROUS CONTROLLER
The controller allows you to control the amount of nitrous over a period of time by providing a pulse width modulation to the solenoid. This unit allows the user to compensate for varying track conditions and includes many key features including: 0-10 second delay timer; 10% - 100% duty cycle; your choice of single or dual nitrous power ramps, and LED display with touch switch programming.
Part # 71900 |
|
 |
PERFORMER RPM SPRAY N20 PLATES
| MODEL |
Part-No. |
| 2001-05 Harley EFI with factory Delphi throttle body |
71939 |
| Keihin, CV 40mm/42mm Mikuni and Edelbrock with spigot mount |
71926 |
|
| Keihin CV, 51mm spigot mount |
71938 |
| 44mm Screamin' Eagle, 45mm Mikuni spigot mount |
71927 |
| S&S "E" and Edelbrock flange mount |
71928 |
| S&S "G", 48mm Mikuni, RevTech and Carl's Typhoon, flange-mount |
71929 |
| S&S "D" flange-mount |
71930 |
|
|
 |
BOTTLE MOUNTING BRACKET KITS
| FRAME DIAMETER |
Part-No |
Qty. Req. |
| 1-1/8"Diameter Frames |
72666 |
2 |
| 1-1/4" Diameter Frames |
72667 |
2 |
| 1-1/2" Diameter Frames |
72668 |
2 |
| 1-3/8" Diameter Frames |
72669 |
2 |
|
|
){kind=small}
