Edelbrock - Performance Parts for Harleys® - Manifolds

Big Twin Manifolds

Twin Cam Manifolds

Evo Big Twin Manifolds

Evo Sportster Manifolds

- INTRODUCTION

DESIGNED TO MATCH EDELBROCK HEADS FOR MAXIMUM POWER...

Edelbrock aluminum intake manifolds must be used with Edelbrock cylinder heads. They have the same rectangular intake port as our heads for maximum performance. All Edelbrock manifolds come with gaskets, bolts, grommets and vacuum fittings (if needed) and are 50-state legal with Edelbrock Performer heads. Performer 3-piece manifolds have walls that are 1/4" thick at all points to allow for modifications, if desired. They are highly recommended for use with Performer RPM heads because of the various combos used. Available in eight width configurations for various cylinder head/barrel length combinations.

EDELBROCK MANIFOLDS ARE AVAILABLE FOR THESE CARBS...

· Edelbrock
· S&S Super "E"
· S&S Super "G"
· S&S Super "D"
· 44mm Screaming Eagle
· Harley-Davidson® CV
· 40/42mm Mikuni
· 45/48mm Mikuni

HOW TO USE THE CHARTS BELOW AND ON NEXT PAGE...

Use the "Cylinder Length" column for all applications other than S&S kits. Choose your cylinder length and, depending on what head you're using, select the correct intake manifold. If you have an S&S kit, find the cubic inch size under the "S&S Kit" column and go across to find the correct Edelbrock intake manifold for your application.