Edelbrock Victor Max Wedge Cylinder Heads for Big Block Chryslers
TORRANCE, CA - Edelbrock Victor Series cylinder heads for B and RB Max Wedge Chryslers are now available. Offering the proven combination of dedicated engineering and made in USA manufacturing, this new Mopar head is sure to impress.
Starting with the dedicated Edelbrock A356-T6 aluminum casting, a 15° valve angle and 290cc raised runner intake ports .650" improve air-flow on the intake side. Edelbrock engineers also extended the intake mounting flange .950" to eliminate the need for spacer plates with the raised intake port design. The 100cc exhaust ports are raised .250" to increase flow on the exhaust side and the exhaust mounting flange is extended .300". 75cc dual-quench combustion chambers increases compression over the stock 84cc chamber. Finally, the valve cover rail is raised over the stock head to allow for additional valve train clearance.
Two part numbers are available, the bare version #77939, and a version complete with 2.200" intake / 1.810" exhaust valves #77949. The #77949 does not include valve springs or retainers, allowing consumers to use recommended springs to match their cam of choice. These heads are machined to accept up to +.400" longer than stock valves for high lift camshafts.
- Edelbrock designed A356-T6 aluminum casting
- 290cc raised runner intake ports
- 100cc raised runner exhaust ports
- 75cc combustion chamber
- Extended intake and exhaust flange for intake and header fitment
- Will accept up to +.400" length valves
- Matching Super-Victor RB intake manifold available for 4500-series carbs, #2893
- Part-No. #77939 (without valves), #77949 (with valves)
- Retail Prices starting at: $695.95 ea.
For more information visit www.edelbrock.com or call (800) 416-8628
Founded in 1938, Torrance-based Edelbrock, LLC is recognized as one of the nation's premier designers, manufacturers and distributors of performance replacement parts for the automotive and motorcycle after markets. For more information please visit us at www.edelbrock.com
Edelbrock, LLC opened its first green sand foundry in 1990 in order to fully control the quality of the castings. A brand new robotically-controlled permanent mold facility was opened in 2007. The Edelbrock Foundries are ISO 9001 registered, delivering modern production solutions for aluminum casting and Made in the USA quality.