|
|
EDELBROCK MATCHING VALVETRAIN COMPONENTS
CAMSHAFTS, ROLLER LIFTER KITS, TIMING COVERS, GEAR DRIVES, TIMING CHAIN SETS, & MORE... |
Edelbrock #77409 Heads Shown |
 |
CAMSHAFTS
Edelbrock Camshafts are available in a wide range of performance levels, to suit nearly every street application. Performer-Plus cams are ideal for a daily driven or mild performance vehicle, while Performer RPM cams are suitable for true high performance engines capable of producing over 1HP per cubic inch. NEW to the Edelbrock Camshaft line-up is our Rollin' Thunder series of hydraulic roller lifter cams, offering improved performance over conventional hydraulic lifter cams. |
 |
| |
ROLLER LIFTER KITS
Edelbrock's high performance hydraulic roller lifters for small-block Chevy, big-block Chevy and small-block Ford are the perfect match for street and high performance applications. These lifters are available in two different styles, retro-fit and OE replacement. The precision self-aligning retro-fit hydraulic roller lifters are designed for use in early model non-roller engine blocks originally equipped with conventional lifters. (Sold in complete sets) |
 |
| |
TIMING COVERS
Edelbrock offers a complete assortment of timing covers that enhance both under hood appeal and functionality. We offer a two-piece design for applications such as the LS1 and Small-Block Chevy for ease of camshaft adjustment or replacement. Other Timing covers feature a chrome plated stamped steel, or die cast aluminum finish. |
 |
| |
GEAR DRIVES
The Accu-Drive® camshaft gear drive kit replaces a stock timing chain with a precision gear drive system. The gear drive can be easily installed. Just replace the stock crank and camshaft sprockets with Accu- Drive® gears and slip in the idler assembly. Most Accu-Drives require no modifications to the engine block, although some fitting of the axles and front cover may be required.
The Accu-Drive® gear drive system transmits power from the crankshaft gear to a full floating main idler which drives the camshaft gear. A unique feature of the Edelbrock Accu-Drive® system is the ability of the main idler gear to float to an optimum position between the crankshaft and camshaft gears, assuring absolutely equal load sharing between the crankshaft and the camshaft gears. The gears are made from billet SAE-1144 steel with induction hardened teeth. Gear teeth are shaved for precision operation. The set features hardened and ground idler pins from billet steel. |
 |
| |
TIMING CHAIN SETS
Performer-Link timing chain sets are for use with Edelbrock or stock cams. They have a solid-bushing chain for a true bearing surface that rolls with the sprockets, eliminating chain stretch. Cam sprockets are made from 35,000 psi tensile strength cast iron. Crank sprockets are made from billet SAE-1144 steel and induction heat treated. Three Performer-Link sets are stock replacement parts and 50-state legal (see listings in bold type). All other sets have three keyway setting points to ensure accurate timing selection for early or late-model vehicles. Performer-Link timing sets are not for use above 6500 rpm. |
 |
| |
PUSH ROD SETS
Hardened Steel Pushrod Set are for use in engines with or without hardened steel guideplates. Manufactured from case-hardened tubing with a surface hardening and welded ends for maximum durability. 5/16" in diameter. Sold in sets of 16. |
 |
| |
SPRINGS AND RETAINERS
Sure Seat Valve Springs are made of highest quality spring wire and precision wound to close tolerances, our Sure Seat Valve Springs are designed for use on original equipment heads with our Performer-Plus, Performer RPM and Torker-Plus camshafts. The #5900 Series valve springs are designed for use with OEM valve rotators. To keep your warranty valid, use only the springs recommended by Edelbrock for each camshaft application. Valve Spring Kits contain non-rotator valve springs, retainers and matching valve stem locks.
Valve Spring Retainers are made of superior quality steel, machined and heat-treated for strength, these retainers have a black-oxide finish for rust and corrosion protection.
Heat-treated and machined, our valve stem locks are for use with Edelbrock retainers. Available in sets of 32 (except #9614). |
 |
Camshafts
