|
| |
EDELBROCK TRAILING ARMS
|
|
 |
TRAILING ARMS
The Rectangular Trailing Arms are constructed from .120" wall cold rolled steel tubing for maximum strength and flex elimination. These trailing arms have fluted, greasable, graphite/polyurethane bushings, which are superior to the stock rubber bushings.
Tubular Trailing Arms are constructed of 1-1/4" diameter .120" wall steel tubing which offers increased strength over other designs, but also have the added advantage of lighter weight.
Heavy-duty Adjustable Trailing Arms allow easy rear suspension adjustments for optimum handling and traction. They can be adjusted without removing the arms from the vehicle. Simply loosen the jam nuts and adjust pinion angle. Spherical ball assembly with Delrin bushings allows rear suspension to move more freely. Includes graphite/polyurethane differential bushings to replace soft OE bushings. All parts sold in pairs. |
 |
| Year & Model |
Upper Arms |
Lower Arms |
|
Adjustable |
Tubular |
Box Style |
Tubular |
| 1982-02 Camaro/Firebird |
N/A |
N/A |
#5274 |
#5204 |
| 1978-88 GM A-Body & G-Body |
#5247 |
#5267 |
N/A |
#5204 |
| 1968-72 GM A-Body |
#5248 |
#5268 |
N/A |
#5205 |
| 1964-67 GM A-Body |
#5249 |
#5269 |
N/A |
#5205 |
| 1979-04 Mustang & 1979-86 Capri |
#5255 |
N/A |
N/A |
#5221 |
| 2005-10 Mustang |
#5253 |
#5266 |
N/A |
#5276 |
2003-05 Hummer H2
01-08 2 & 4WD Tahoe, Suburban, Yukon, Denali, Escalade, Avalanche |
N/A |
N/A |
N/A |
#5260 |
|
|
TRAILING ARM RELOCATION BRACKETS
These brackets lower the mounting point of the rear trailing arms. A must for lowered vehicles; they correct the trailing arm angle while lowering the instant center of the vehicle, which improves forward bite and eliminates rear squat during hard acceleration. Two non-stock mounting locations are available as well as the stock location and they will accept Edelbrock, OEM, or any other aftermarket lower trailing arm on the market. Grade 8 hardware is included; welding is required for installation. |
 |
| Application |
Part # |
| 1982-2002 Camaro/Firebird |
#5275 |
| 05-10 Mustang Lower Trailing Arm Relocation Bracket |
#52103 |
|
|
REPLACEMENT TRAILING ARM HARDWARE KITS
These kits replace factory hardware with new bolts, A/N washers and nylock nuts. |
 |
| Application |
Part # |
| 1982-02 Camaro/Firebird |
#5215 |
| 1978-88 A-Body & G-Body |
#5215 |
| 1979-04 Mustang |
#5216 |
| 1964-72 A-Body |
#5217 |
|
|
TUBULAR BRACES
Tubular braces work with GM A-Body and G-Body trailing arms to accurately locate the rear suspension for major improvements in cornering, steering response and traction with less wheel-hop and more power to the ground. All parts sold in pairs. |
 |
| Application |
Part # |
| 1978-88 GM A-Body & G-Body Tubular Brace (includes hardware) |
#5210 |
| 1968-72 GM A-Body Tubular Brace (includes hardware) |
#5211 |
| 1964-67 GM A-Body Tubular Brace (includes hardware) |
#5212 |
|
Application Chart
