|
|
| |
EDELBROCK SUSPENSION INTRODUCTION
EDELBROCK MANUFACTURES HIGH-QUALITY PERFORMANCE SUSPENSION COMPONENTS FOR YOU... |
 |
 |
| SUSPENSION COMPONENTS INCLUDE THE FOLLOWING PARTS: |
| |
APPLICATION CHART
With the all new up-to-date application chart, you can now find all the Edelbrock suspension components avaialable for your make and model. You may also download a pdf of the application chart for your convinience. Please Click Here to download pdf now. |
 |
| |
ANTI-HOP BARS
Edelbrock Anti-Hop Bars relocate the upper trailing arms to change the instant center of the rear suspension. This will improve the chassis reaction and increases the effectiveness of sticky race tires. The Edelbrock Anti-Hop Bars are one of the most effective and easily installed traction improvements. Add our Adjustable upper trailing arms for even more chassis tuning and improve the advantages of the Anti-Hop Bars. Includes graphite/polyurethane bushings. |
 |
| |
COIL SPRINGS (EIBACH)
Designed to enhance your vehicles looks and handling, these high-quality Eibach springs are matched to Edelbrock Performer IAS shocks as part of our Total Handling Package. Lowered spring heights vary based on application. |
 |
| |
COMPLETE SUSPENSION KITS
Available for popular GM and Ford muscle cars, Edelbrock Suspension Kits include our most popular suspension components in one box for a complete performance tuned handling package. With these kits,
there's no guesswork about matching suspension components because Edelbrock has done the work for you. Each Edelbrock Suspension Kit has the right combination of parts for everything you need to keep the power to the pavement. It's the Edelbrock Total Handling Power Package! |
 |
| |
CROSSMEMBERS
Provides a sturdy upper shock mount for use with Edelbrock Performer IAS, Classic IAS or other shocks of a similar design. Eliminates the flimsy stock sheet-metal mount. The sliding end piece fits chassis with slight variations in width and requires welding for installation |
 |
| |
HARDWARE
These kits replace factory hardware with new bolts, A/N washers and nylock nuts. |
 |
| |
PANHARD RODS (ADJUSTABLE)
The Adjustable Panhard rod compliments other suspension modifications by allowing for precise rear axle alignment resulting in reduced body roll, more responsive handling and maximum suspension travel without binding. Includes greasable polyurethane bushings. |
 |
| |
SHOCK ABSORBERS
Edelbrock IAS shocks deliver incredibly responsive handling around tight turns and dramatically reduce body roll with a comfortable ride for outstanding vehicle control. Manufactured by Edelbrock in the USA, these are the only automotive shocks that incorporate the patented Ricor Inertia Active System. This unique valve design senses changes in terrain and adjusts instantly for a better ride than you ever thought possible. |
 |
| |
STRUT TOWER BRACES
Edelbrock Strut Tower Braces utilize a three-point design to reinforce the front sub-structure by triangulating the strut towers with the firewall and cowl. The result is improved handling through quicker and more precise steering reaction. All Edelbrock strut tower braces are black powder-coated. Edelbrock Strut Tower Brace #5225 allows clearance for installation of Edelbrock intake #3821, or #7123 on 1994-95 5.0L Mustangs. Note: You must use hardware kit #5299 when installing #5225 on 1994-95 Mustang Cobra. |
 |
| |
SUB-FRAME CONNECTORS
Edelbrock weld-in sub-frame connectors are designed to improve handling and straight line performance by eliminating chassis twist and improving weight transfer. Made with 1-5/8" diameter .120" wall steel tubing, laser cut and formed end brackets fit the contours of the sub-frame. Get the performance benefits of a more rigid chassis without reduced ground clearance. |
 |
| |
SWAY BARS
After you've installed the Edelbrock Total Power Package in your muscle car... now it's time to make sure that newly added power hits the pavement. Get improved handling performance by reducing body roll with Edelbrock's new front and rear Anti-Sway Bars. These Anti-Sway Bars are designed and tested on the road to give your 1993-02 Camaro/Firebird the grip it needs to keep you planted on the road. |
 |
| |
TORQUE ARMS
This heavy-duty constructed torque arm replaces the flimsy factory stamped steel piece, providing a more durable structured support between the transmission and rear axle. Equipped with an adjustable sleeve to allow for precise pinion angle adjustment on vehicles with altered ride heights and includes a high quality polyurethane bushing for the most responsive handling possible. |
 |
TRAILING ARMS
Adjustable Upper Trailing Arms: SEMA Popular Mechanics Award winner for outstanding design innovation, Edelbrock adjustable upper trailing arms allow for easy and precise adjustment of pinion angle for improved alignment, resulting in better traction and handling. Constructed with a spherical ball clevis on one end and a steel mounting bracket on the other, this heavy-duty assembly is tied together with a hard anodized aluminum adjuster sleeve.
Lower Trailing Arms: Constructed with a minimum .120" thick, cold rolled steel, Edelbrock lower trailing arms offer superior strength, drastically reducing flex in your vehicles rear suspension. Polyurethane bushings and grease-able fittings are also included.
Tubular Trailing Arm Braces: Constructed of 1.250" tubular steel, these trailing arms triangulate the rear cross-member and upper and lower trailing arms GM A&G-body vehicles. The end result is a firmer, more solid support system in rear suspension. |
 |
| |
Application Chart
