Edelbrock is known for innovative products, and our new
Nitrous Systems are no exception... All Edelbrock Nitrous
Systems are dyno-tested and calibrated to deliver accurate
and safe horsepower gains with even distribution to each cylinder.
Our nitrous calibrations are determined through dyno-testing, not
simple mathematical formulas, which do not take into account real-world variables.
Available from 50 to 500+ horsepower, Edelbrock Nitrous Systems and components
are the quickest and easiest way to get large horsepower increases with a minimum
of engine modifications and expense. With the Performer and Performer RPM Line of
Nitrous Systems, you get a 50 to 250 horsepower increase at the
flip of a switch with an installation time of approximately 4 hours.
New Performer RPM II systems include high-flow solenoids and
stainless steel spray bars for 400+ hp capability. Victor Jr. racing
systems produce serious horsepower with jetting supplied from
200 to 400 horsepower. If you want to take it up to the extreme
level we have the Edelbrock Series 1, Series 2 and Series 3
Direct-Port Nitrous Systems which yield a huge gain of up to
500+ horsepower! Check out these advanced features... Click HERE to download nitrous pdf.
After peaking at a best of 6.74 seconds @ 208 MPH, Randy Walker knew it was time to upgrade his nitrous system with a brand that offers technology, quality and service. It didn’t take Randy long to choose Edelbrock as his new brand of choice. With the help of Steve Johnson, Edelbrock's Director of Motor Sports, Randy chose a three-stage system made up of two sets of Edelbrock's patented E2 direct port nozzles and one stage of our patented E3 nozzles. This technology, combined with Steve Johnson's knowledge and experience as a drag racer and nitrous tuner, powered Randy to a career best of 6.54 @ 211 MPH! See it for yourself and you'll choose Edelbrock too.
High-Flow Bottle Valve Included with All Systems Capable of Handling 500+ HP Hinged Steel Red Powder-Coated Bottle Brackets Rubber Insulators Included to Protect the Nitrous Bottle Pre-Terminated Wiring Harness Longer Leads and Covered Fuse Holder for Better Corrosion Resistance High-Quality, Powder-Coated Aluminum Nitrous Plates Work on Both Dual-Plane and Single-Plane Intakes Detailed Installation Instructions Expert Technical Support and Toll-Free Tech Hotline Precision-Machined Stainless Steel Nitrous and Fuel Solenoids Flow Matched to the Horsepower Range of Edelbrock Nitrous Systems Fully Repairable and Serviceable Durable Teflon® Plunger Withstands Seal Expansion Precision CNC-Machined Stainless Steel Jets Won't Erode Like Brass Jets
Engine Configuration Tips for all Edelbrock Nitrous Systems
When using an Edelbrock Nitrous System,
extra fuel is required to make the added
horsepower. We recommend Edelbrock
fuel pumps
to supply the needed fuel for all
Edelbrock Nitrous Systems. Call the Edelbrock
Tech Line at 1-800-416-8628 for more information
in determining your fuel system needs.
Because of the high cylinder pressures
generated with nitrous systems, we
recommend high-strength internal engine
components such as forged pistons and
crankshaft, high-performance connecting
rods, etc. with power increases of 150
horsepower or more.
Since many standard ignition systems experience misfire at
high cylinder pressures and/or high RPM, we recommend
using a high-quality performance ignition system. All performance
upgrades such as Edelbrock Performer and Performer RPM Power
Packages, fresh air systems, cams, cylinder heads, etc. will work
with the Performer and Performer RPM Nitrous Systems. Victor Jr.
systems are for competition level engines only.
*
Not legal for sale or use on pollution controlled motor vehicles.
Carb/Plate Systems
Capable of Handling 500+ HP
