|
|
 |
| CYLINDER HEADS - Ford - Big Block - RPM |
 |
|
|
|
| Street High-Performance Heads - FORD FE, 429/460 FORD |
| |
|
| |
Performer RPM FE
- Direct bolt-on heads for 1961-76 390-427-428 Fords
- 428 Cobra Jet-sized valves promote excellent flow for streetable power
- #60089 can be machined to accept 2.19" intake and 1.73" exhaust valves
|
 |
| |
| PERFORMER RPM FE FOR 390-428 COBRA JET |
| Chamber Size |
Intake Port Size |
Valve Sizes (in/ex) |
Bare (single) |
Complete (single) |
| 72cc |
170cc |
2.09"/1.66" |
#60059* |
#60069* |
| |
| PERFORMER RPM FE for 390 (NHRA-accepted for Stock and Super Stock) |
| 72cc |
170cc |
2.03"/1.55 |
#60057* |
N/A |
| |
| PERFORMER RPM FE for 428 (NHRA-accepted for Stock and Super Stock) |
| 72cc |
170cc |
2.09"/1.66" |
#60058* |
N/A |
| |
| Performer RPM FE for 427 Low-Riser/Medium-Riser |
| 76cc |
170cc |
2.09"/1.66" |
#60089* |
#60079* |
| |
| Performer RPM FE for 427 Low-Riser/Medium-Riser FE (NHRA legal) |
| 76cc |
170cc |
2.09"/1.66" |
#60087* |
N/A |
| |
| ROCKER SHAFT STUD KIT for all Edelbrock FE Cylinder Heads |
#6009 |
 Note: 76cc heads have vertical bolt pattern only. 390 GT exhaust manifolds will not fit.
See Cylinder Heads Specs for information. Rocker Shaft Stud Kit #6009 provides better rocker shaft retention and is highly
recommended for use with Edelbrock FE heads. It eliminates wearing of the threads and the
possibility of bottoming the rocker shaft bolts in the head. |
|
|
| |
|
| |
Performer RPM 460
- Designed for 1968-87 429/460 Fords
- Ideal for high-performance street, drag racing and marine applications
- Over 500+ hp at 6500 rpm (+30 hp more than ported factory heads) and 525+ ft/lbs.
of torque at 4500 rpm with the Performer RPM Total Power Package
- Intake ports can be opened up to match Victor manifolds #2965 and #2966
|
 |
| |
| PERFORMER RPM 460 |
| Chamber Size |
Intake Port Size |
Valve Sizes (in/ex) |
Bare (single) |
Complete (single) |
| 95cc |
292cc |
2.19"/1.76" |
#60689* |
#60669* |
| 75cc |
292cc |
2.19"/1.76" |
#60699* |
#60679* |
| Note: Performer RPM 460 heads accept factory exhaust, aftermarket headers and factory valvetrain
components. Requires the use of 3/8" diameter pushrods. See Cylinder Heads Specs for information.
See chart in Edelbrock head gasket sets. |
|
|
| |
|
| |
Performer RPM & Victor Jr. 460 CJ Cylinder Heads
- Designed for 1968-87 429/460 Fords and the SVO 514
- Machined profile Cobra Jet style intake port entries
- Victor Jr. heads are sold complete with titanium retainers and high-quality valve springs
suitable for use with solid roller camshafts
- Match with Edelbrock Victor Series manifolds #2965 and #2966 for maximum power
|
| |
| PERFORMER RPM 460 CJ |
| Chamber Size |
Intake Port Size |
Valve Sizes (in/ex) |
Bare (single) |
Complete (single) |
| 75cc |
310cc |
2.19"/1.76" |
#61659* |
#61649* |
|
|
|
|
AMC
Small Block
![](../../images/5x1.gif"){kind=small}
