GASKETS - Applications - Head
 
CYLINDER HEAD GASKETS
These Head Gaskets feature a tough, scuff-resistant silicone rubber coating that provides excellent sealing and conformability. They don’t require the engine to be warmed up in order to seal, and if the engine needs to be disassembled, they release without sticking. The silicone coating reduces fluid migration through the gasket, and leaks, if they occur, are easy to detect on the white material.

AMC
Application Specs Part #
1967-69 290-390;
1970-91 290-304-343; 360-390-401
4.275" bore
0.045" compressed
10.60 cc volume
#7329

BUICK
Application Specs Part #
1967-76 400-455 4.400" bore
0.050" compressed
12.50 cc volume
#7346

CHEVROLET
Application Specs Part #
1958-1986 302-327-350 S/B 4.190" bore
0.038" compressed
8.60 cc volume
#7310
1958-1986 E-Tec 302-327-350 S/B 4.190" bore
0.038" compressed
8.60 cc volume
#7310
1958 & Later S/B Vortec Bowtie 4.190" bore
0.038" compressed
8.60 cc volume
#7310
1992-1997 LT1/LT4 4.100" bore
0.052" compressed
11.50 cc volume
#7342
1958-65 348/409 "W-Series" 4.500" bore
0.048" compressed
13.00 cc volume
#7359
1965-90 Rectangular Port Mark IV, 396-402-427-454 B/B 4.520" bore
0.038" compressed
10.05 cc volume
#7302
1965-90 Oval Port Mark IV, 396-402-427-454 B/B 4.520" bore
0.038" compressed
10.05 cc volume
#7302
1991 & later Rectangular Port Gen V & VI, 454-502 B/B 4.520" bore
0.038" compressed
10.05 cc volume
#7375

CHRYSLER
Application Specs Part #
1966-87 318-340-360 4.140" bore
0.038" compressed
8.3 cc volume
#7326
1992 & Later Magnum 4.140" bore size
0.048" compressed
10.7 cc volume
#7327
1958-1979, 361-383-400,
413-426 [except Hemi],
and 440 engines
4.450" bore
0.038 compressed
9.69 cc volume
#7325

FORD
Application Specs Part #
1963-96, 289, 302 S/B [except Boss] & 351W (J)
1982-96, 5.0L & 5.8L
4.100" bore
0.038" compressed
8.22 cc volume
#7313
302 E-Boss and 351W E-Boss (Clevor) Conversions (H) 4.100" bore
0.041" compressed
9.2 cc volume
#7341
1970-74 351 Cleveland 4.080" bore
0.038" compressed
8.1 cc volume
#7328
1958-76 390-428 FE 4.400" bore
0.038" compressed
9.90 cc volume
#7337
1968-1987 429-460 B/B 4.500" bore
0.048" compressed
12.5 cc volume
#7314

OLDSMOBILE
Application Specs Part #
1965-76 400-425-455 4.230" bore
0.038" compressed
8.75 cc volume
#7340

PONTIAC
Application Specs Part #
1961-1980 326-389-421-428-455 4.200" bore
0.038" compressed
8.96 cc volume
#7381
 
(A) Does not include end seals; Edelbrock recommends the use of silicone sealant in place of end seals
(B) Must be used with OE-style valley pan
(C) Does not have embossed silicone bead
(D) Does not fit CJ or SCJ
(E) For use with Bowtie Vortec #2814 intake
(F) For use with large port applications, including Edelbrock RPM heads #60809/#60819, will not fit factory heads
(G) For use with large port applications only
(H) For use with Edelbrock RPM heads #61699 only
(I) For use with small port applications only
(J) Graphite style
(K) Gasket is trim-to-fit for port matching
Sign Up To Receive Our Newsletter & Members Only Specials  
Privacy Policy | Order A Catalog | Warranty Information| Site Map
©2009 Edelbrock Corporation