|
| |
Dodge Viper Heat Shields
Designed for all 1992-99 Dodge Vipers using Edelbrock Tubular Exhaust System headers, these heat shields
deflect heat away from under hood components that can be damaged by the heat created by headers.
Edelbrock heat shields deflect heat down and out of the engine compartment keeping these important parts
cool: brake master cylinder, brake booster, brake lines, plastic heater box, coolant bottle and spark plug
wires. Embossed with the "Edelbrock" logo, constructed out of 409 stainless steel and ceramic coated, the
heat shields cover the top and the side of the header and should work with any manufacturers' headers. |
 |
| Description |
Part # |
| Dodge Viper Heat Shields |
#6700 |
|
 |
O2 Sensor Wire Extension Assemblies
These direct plug in and go O2 sensor extension assemblies can be used when relocating any O2 sensors on race headers. These are the same high quality O2 sensor extension wires that are used on all Edelbrock race headers. They include OE style weather pack terminals, protective sleeve and connectors on each end. |
 |
| Description |
Part # |
| GM LS1 Series Engine Headers (30" long, 4 wire with square plug, 1 pair) |
#65881 |
| GM 4.3L TPI/CPI in S10/S15 (12" long, 4 wire with flat plug) |
#65882 |
| GM V6 and V8 Engine Truck Headers (12" long, 1 wire) |
#65883 |
| GM V6 and V8 Engine Truck Headers (34" long, 1 wire) |
#65884 |
|
|
Heat Stove Stack and Tube Kits
These are the same components supplied with our shorty headers. These kits can be added on to most headers with 1-5/8" primary tubes. Edelbrock heat stove stacks are made from mild steel tubing and are zinc plated for corrosion protection. Each kit includes heat stove stack, flex tube and clamps for an easy installation. |
 |
| Description |
Part # |
| 1-1/2" Heat Stove Stack & Tube Kit |
#65900 |
| 2" Heat Stove Stack & Tube Kit |
#65951 |
|
|
Universal Heat Stove Flex Tubes
These flex tubes are designed to fit aftermarket headers and stock exhaust manifolds. |
 |
| Description |
Part # |
| 1-1/4" Universal Heat Stove Flex Tube |
#65952 |
| 1-1/2" Universal Heat Stove Flex Tube |
#65953 |
| 1-3/4" Universal Heat Stove Flex Tube |
#65904 |
| 2" Universal Heat Stove Flex Tube |
#65905 |
|
|
4-Bolt Cat-Converter Flange Tube Adapter Kit
This kit can be used to adapt a 3" exhaust tube to a four bolt flange similar to the kind used on early GM some aftermarket cat-converter applications. Welding is recommended for retention to the exhaust tube adapter, but can also be clamped if necessary. Kit includes the adapter assembly, gasket and hardware for a complete installation. |
 |
| Description |
Part # |
| 4-Bolt Flange to 3" Tube Adapter Kit |
#65911 |
|
|
Spark Plug Boot Protectors
Edelbrock Spark Plug Boot Protectors can withstand continuous 1200° temperatures and are great for use in everything from SUV's and motor homes to race cars. |
 |
| Description |
Part # |
| Spark Plug Boot & Wire Protectors (Set of 4) |
#65889 |
|
|
Evacuation Tubes
Our evacuation tubes will help to eliminate pressure in the crankcase. They are made from 1/2" steel or stainless steel pipe and include a 1/2" NPT male pipe thread for installation of a check valve. |
 |
| Description |
Part # |
| Steel Evacuation Tubes (1 pair) |
#65954 |
| Stainless Steel Evacuation Tubes (1 pair) |
#65955 |
|
|
Collector Mounting Tabs
Our collector mounting tabs are laser cut and formed from 1/8" hot rolled steel or stainless steel. They are
designed for attaching slip on header collectors to headers. Welding is required for installation. |
 |
| Description |
Part # |
| Steel Collector Tabs (Set of 4) |
#65914 |
| Stainless Steel Collector Tabs (Set of 4) |
#65915 |
|
|
| |
Band Clamps
These are the same high quality band clamps that are used in our exhaust systems. They are manufactured from aluminized steel and provide cleaner installation for mounting exhaust tubing than standard U-bolt style exhaust clamps. |
 |
| Description |
Part # |
| 2-1/4" Band Clamps (1 pair) |
#65916 |
| 2-1/2" Band Clamps (1 pair) |
#65917 |
| 3" Band Clamps (1 pair) |
#65918 |
| 3-1/2" Band Clamps (1 pair) |
#65919 |
|
|
Tubular Exhaust System Header Accessories
This Cross-Over Pipe For Lowered Trucks is designed to replace stock pipe and give additional ground clearance of 1-5/8" on lowered Chevrolet/GMC trucks. For use with stock exhaust manifolds or Edelbrock Shorty Headers. See application chart below. |
 |
| Description |
Part # |
| Cross-Over Pipe for lowered Chevrolet/GMC trucks (Ti-Tech finish) |
#68003 |
|
|
Tubular Exhaust System Header Accessories |
 |
| Description |
Part # |
| Cross-Over and Y-Pipe Kit for 86-90 F-Body |
#65930 |
|
| Make & Model |
Year |
Engine |
Remarks |
Auto |
Std. |
| Pick-up, 1500/2500 |
1988-92 |
4.3L V6 |
2 W.D. |
yes |
no |
| Pick-up, 2500 |
1993 |
4.3L V6 |
2 W.D. |
yes |
no |
| Pick-up, 1500/2500 |
1988-92 |
5.0/5.7L V8 |
2 W.D. |
yes |
no |
| Pick-up, 2500 |
1993 |
5.0/5.7L V8 |
2 W.D. |
yes |
no |
| Suburban, 1500/2500 |
1992-93 |
5.7L V8 |
2 W.D. |
yes |
no |
|
|
Replacement Gaskets
Edelbrock replacement gaskets are made to our high standards of quality and performance. They're the same high quality gaskets that we supply with our intakes, heads, carbs and other components. |
 |
| Description |
Engine |
Footnote |
Part # |
| Chevy |
2.8L |
B |
#6920 |
| Chevy |
4.3L |
B |
#6921 |
| Chevy LT1 |
5.7L |
B |
#6922 |
| Chevy |
5.0/5.7L |
B |
#6923 |
| Chevy |
7.4L |
B |
#6924 |
| Dodge |
3.9L |
B |
#6925 |
| Dodge/Jeep |
5.2/5.9L |
B |
#6926 |
| Dodge |
5.2/5.9L |
A,C,D |
#6954 |
| Dodge Viper |
8.0L |
A |
#6931 |
| Dodge Hemi |
5.7L |
- |
#6963 |
| GM LS-1 '00-02 |
5.7L |
A,C,E |
#6952 |
| GM |
4.8/5.3/6.0L |
A,C,F |
#6953 |
| Ford |
2.0L |
B |
#6958 |
| Ford |
4.0L |
B |
#6928 |
| Ford |
4.6/5.4L |
A |
#6945 |
| Ford |
5.0/5.8L |
B |
#6929 |
| Ford |
7.5L |
B |
#6930 |
| Ford |
5.4L |
A,C,D |
#6939 |
| 2" Donut |
- |
- |
#6935 |
| 2-1/4" Donut |
- |
- |
#6936 |
| 2-1/2" Donut |
- |
- |
#6937 |
| 3" Donut |
- |
- |
#6960 |
| Dodge Donut |
5.2/5.9L |
C |
#6956 |
| Ford Donut |
5.4L |
C |
#6957 |
| GM Donut |
5.0/5.7L |
C |
#6961 |
| GM Donut |
5.0/5.7L |
G |
#6964 |
| GM LS/LM |
- |
B |
#6962 |
|
|
UNIVERSAL MANDREL BENT TUBES -
FOR CUSTOM EXHAUST INSTALLATIONS
These Universal Mandrel Bent Tubes are ideal for the do-it-yourselfer or custom shop fabricating an exhaust system. The 2-1/4", 2-1/2" and 3" bent tubes are manufactured from 16 gauge cold rolled mild steel while the 4" bent tubes are made from aluminized steel. Available in 90°, 120° and 180° pre-bent angles and also sold in 2-1/4", 2-1/2", 3" and 4" diameters. |
 |
| Description |
Part # |
| 2-1/4" 90° Mandrel Bent Tube (3-1/2" Radius) |
#65966 |
| 2-1/4" 120° Mandrel Bent Tube (3-1/2" Radius) |
#65967 |
| 2-1/4" 180° Mandrel Bent Tube (3-1/2" Radius) |
#65968 |
| 2-1/2" 90° Mandrel Bent Tube (4" Radius) |
#65960 |
| 2-1/2" 120° Mandrel Bent Tube (4" Radius) |
#65962 |
| 2-1/2" 180° Mandrel Bent Tube (4" Radius) |
#65964 |
| 3" 90° Mandrel Bent Tube (4-1/2" Radius) |
#65961 |
| 3" 120° Mandrel Bent Tube (4-1/2" Radius) |
#65963 |
| 3" 180° Mandrel Bent Tube (4-1/2" Radius) |
#65965 |
| 4" 90° Mandrel Bent Tube (6" Radius) |
#65975 |
| 4" 120° Mandrel Bent Tube (6" Radius) |
#65976 |
|
| IMPORTANT FOOTNOTES (applies to gaskets only) |
| (A) |
Complete set. |
| (B) |
Port flange gaskets only. |
| (C) |
Shorty header gaskets only. |
| (D) |
Port flange and donut gasket. |
| (E) |
Port flange, cat, EGR and AIR gasket. |
| (F) |
Port flange, crush ring, EGR and AIR gasket. |
| (G) |
Only fits shorty headers #35272/#65273 |
|
Accessories
