|
| |
GENERAL MOTORS
GM LT1 V8
Designed for 1994-97 vehicles with LT1 engines and 1996 LT4 engines. Match with our new Performer
LT1 head #61909 and camshaft #2108 for premium performance. Gaskets included. 50-state street legal. |
 |
| |
| Application |
Part # |
| 52mm Twin Throttle Body (1994-97) |
3809 |
| 58mm Twin Throttle Body (1994-97) |
3810 |
|
 |
| |
GENERAL MOTORS
GM LS1 V8
Designed to fit factory plenum with no modifications. They are cast, fully machined, and assembled by
Edelbrock using all new components including a pre-set TPS and an idle air bypass solenoid. Extra idle
control is provided with the addition of an idle bleed screw. 50-state street legal. |
 |
| |
| Application |
Part # |
| 80mm Throttle Body for 1997-99 Camaro/Firebird |
3867 |
| 80mm Throttle Body for 2000-02 Camaro/Firebird and 2004 Pontiac GTO |
3868 |
|
|
| |
VICTOR LS SERIES 90MM RACING THROTTLE BODY
VICTOR RACING THROTTLE BODIES & ADAPTERS
Based on our 80mm LS1 throttle body #3867, the Victor LS series 90mm racing throttle body is designed
to increase flow and horsepower potential in competition applications. The lower water tube has been
removed, but it retains the stock LS1 style TPS, IAC and PCV port. Extra idle control is provided with the
addition of an idle bleed screw. It has both an LS1 and LS2 intake manifold flange and can be mounted on
aftermarket LS1 manifolds with a 90mm opening, or LS2 and LS7 factory manifolds, but does not retain all
stock equipment or throttle cable setup. It is perfect for enthusiasts who want to use an LS2 or LS7 manifold
or entire engine in an older vehicle with no fly-by-wire throttle. |
 |
| |
| Application |
Part # |
| 90mm Throttle Body (includes TPS/IAC) |
3864* |
| 90mm Throttle Body (without TPS/IAC) |
38640* |
| 90mm Throttle Body with Black Powder Coated Finish |
38643* |
|
Pro-Flo2 EFI
