We are proud to announce the all new Camshaft cam card locator. Please type in the part number of your desired Performance Camshaft into the search field below. Proper search terms are as follows (2102, 5082, 7122)
Please do not use special characters.
Performance Camshafts, Lifter Kits and Matching Valvetrain for 4.3L 90° V6 Chevy - Edelbrock.com
Camshaft: Rollin' Thunder Hydraulic Roller
Part #: #3714
Vehicle Type: CHEVROLET
Engine Application: 4.3L 90° V6
RPM Range: Idle-5500
DURATION AS ADVERTISED
DURATION @ .050
LIFT @ CAM (Lobe)
LIFT @ VALVE
LOBE SEPERATION: 112°
INTAKE CENTERLINE: 107°
IDLE VACUUM @ 1000 RPM: 17"
The information below is for verification of
opening and closing events.
INTAKE TIMING @ .050" LIFT:
Opens: 2° ATDC
Closes: 32° ABDC
EXHAUST TIMING @ .050" LIFT:
Opens: 44° BBDC
Closes: 10° BTDC
OPTIONAL VALVE SPRINGS: #5814
CAM FEATURES: For use with OEM hydraulic roller lifters (use original lifters). Not for 1992-later 4.3L balance shaft engines.
INSTALLATION NOTES: Use Edelbrock Performer-Link Timing Chain and Gear Set #7801. Do not use late model timing chain and gear sets that are designed for emission-controlled engines. These timing sets are machined in a retarded position and are not recommended for this camshaft installation. Edelbrock Timing Sets feature three keyways for specified timing selection. Use – position for most applications.
Footnote 1: Requires aftermarket computer chip (not available from Edelbrock) for use with manifold #3713.
Footnote 2: Use only recommended Edelbrock Sure Seat Valve Springs #5814 or original equipment equivalent.