ACCESSORIES - Misc.
Email Page To a Friend

POLISHED WATERNECKS
These polished waternecks are a great to finish of your engine. They feature an O-ring design for an improved seal, which also allows for removal without requiring a new gasket. Fits any 1-1/2" diameter outlet hose.
Application Part #
Straight (Chevy 4.3L V6, Chevy V8 and Chrysler V8) #4816
45° Swivel (Chevy 4.3L V6, Chevy V8 and Chrysler V8) #4817
90° Swivel (Chevy 4.3L V6, Chevy V8 and Chrysler V8) #4818
HOLD-DOWN TABS
Universal valve cover hold-down kits may be used on all Edelbrock and similar design chrome valve covers. #4401 also works with our Elite Series low profile S/B Chevy valve covers and #4402 works with Elite Series tall profile S/B Chevy covers. All hold-down kits have 4 items per pack, except #4414.
Application Part #
2-piece wing bolts (3-3/4" long) #4400
2-piece wing bolts (4-1/4" long, 4 per pack) #4401
1-piece race wing bolts, universal (5" long, 4 per pack) #4402
Hold-down tab kit (small-block Chevy, 4 pieces) #4404
Hold-down tab kit (big-block Chevy, 7 pieces) #4414
 

OIL FILL HOLE PLUGS
Oil plugs have recessed Edelbrock script and are designed to plug the oil fill hole on any of Edelbrock's Signature Series valve covers or any 1-1/4" diameter fill hole on similar designs. In chrome or rubber.
Application Part #
Chrome Oil Fill Hole Plug #4415
Rubber Oil Fill Hole Plug #4416
Rubber PCV Valve Grommets (pair) #8094
 
BILLET ALUMINUM OIL FILL CAPS
These push-in style caps are machined from 6061 T6 billet aluminum then polished and laser-etched with the Edelbrock logo on top.
Application Part #
Dome-style piston, fits 1-1/4" holes #4406
Flat top-style piston, fits 1-1/4" holes #4407

CRANKCASE VENTILATION HOSE CONNECTION KIT
This is a replacement kit for the crankcase ventilation hose connection included with chrome air cleaners #1207/#1221 and aluminum air cleaners #4207/#4221. It mounts to the base of the air cleaner, providing a connection for the crankcase ventilation breather hose from the valve cover.
Application Part #
PCV Hose Connection Kit #1205

REPLACEMENT ELEMENTS FOR AIR CLEANERS
To keep your engine running clean, replace the original filter element in your Edelbrock air cleaner with a new element every 3000 miles (sooner in dusty areas). We recommend #1217, #1218 and #1219 replacement elements for any similar design air cleaner.
Application Part #
Oval filter element for #4239 (pre-oiled cotton gauze) #1215
3" tall, 14" diameter for #41613 & #41173 (pre-oiled cotton gauze) #1216
3" tall, 14" diameter for #1207 & #1221 #1217
2" tall, 10" diameter for #1208 #1218
2-1/2" tall, 6-3/8" diameter for #1209 & #1210 #1219
Oval filter element for #1235 & #1236 #1220
Triangular K&N filter element for #1222 #4226

OIL FILL TUBE AND BREATHER
Oil Fill Tube and matching push-in Breather is an original style for vintage manifolds with a 1-1/4" oil breather hole. Included with manifolds #2703, #5408 & #5409. Will also fit #5419, #5425 & flathead intakes.
Application Part #
Chrome finished GM style Oil Fill Tube with Breather #4803

PRO-FLO® T.B.I. CHROME AIR CLEANER TOPS
Top off your engine with a good looking Chrome AirCleaner Top. These are direct replacements for stockair cleaner tops on small-block and big-block Chevy/GMC V8 cars and trucks with Throttle Body Injection. These quality tops are stamped from 18-gauge steel and triple chrome-plated for a highquality finish and great looks. Sealing ring included.
Application Part #
Chrome Air Cleaner Top with Single Wing Nut for 1988-92 GM T.B.I. Vehicles #1213
Chrome Air Cleaner Top with Dual Wing Nuts for 1993-95 GM T.B.I. Vehicles #1214
PRO-FLO® 1000 SERIES REUSABLE AIR CLEANERS
Pro-Flo 1000 Series, with the popular reusable air filter, offers superior flow capacity, low profile, good filtration, performance benefits and long-term savings. Pro-Flo 1000 is an economical and effective way to keep clean air feeding your engine without the expense of a new filter every few thousand miles. Inside every Edelbrock Pro-Flo 1000 Series, you'll find our exclusive reticulated urethane foam element.

Maintaining Pro-Flo's foam element is simple. Just release the spring clip, remove the element, wash in hot, soapy water. Rinse, dry and reassemble. Should you need to replace your foam element, replacement element (#1099) is available. For superior flow capacity, performance and economy, choose Pro-Flo 1000 Series reusable air filters.
Application Part #
Pro-Flo Air Cleaner for 4-bbl. carbs with 5-1/8" air horn #1002*
Pro-Flo Air Cleaner for 2-bbl. carbs with 2-5/8" air horn #1003*
Replacement Air Filter for Pro-Flo 1000 Series #1099*
Sign up for our Newsletter  
Privacy Policy | Order A Catalog | Warranty Information| Site Map
©2008 Edelbrock Corporation