|
|
Elite Series Breathers
Elite Series breathers are die-cast aluminum with a foam element. 3 styles are available: #4201 & #4211
bolt to the side, #4202 and #4212 bolt in the oil fill hole and #4204 and #4214 simply push into the oil fill
hole. Breathers #4202 and #4212 will not fit Elite Series valve covers #4246, #4247 or #4248. |
 |
| |
Polished w/Name |
Polished w/No Name |
EnduraShine |
| Bolt-on style, side-mounting |
#4201* |
#4211* |
N/A |
| Bolt-on style, top-mounting (4" tall) |
#4202* |
#4212* |
N/A |
| Push-in style, top-mounting (2-1/2" tall) |
#4204* |
#4214* |
#42044* |
| |
|
 |
Valve Cover Breathers
Our push-on style valve cover breathers contain an effective filter which traps oil vapor and prevents engine
compartment contamination. Inscribed breathers come with rubber grommets and match our chrome valve
covers. Fits any 1-1/4" diameter valve cover hole.
|
 |
| Round Breather |
#4405* |
| Square Breather without nipple |
#4408* |
| Square Breather with 45° nipple |
#4409 |
| Round Breather with 90° nipple |
#4410 |
| |
|
|
Aluminum Racing Breathers
A cast aluminum breather for competition use. The smooth, polished top with distinctive Edelbrock script
matches our 4100 series racing valve covers.
|
 |
| Polished Aluminum Breather (4-3/4" tall, 3-1/8" bolt space) |
#4203 |
| |
|
|
Circle Track Breathers
Chromed and stamped with the Edelbrock name, these breathers are designed for high-rpm, highperformance
applications. The oiled-cotton, gauze and screen element has very low restriction which is
ideal for competition. Washable breather is available in a push-on or clamp-on style. Kits available with
two clamp-on breathers, two tubes and two clamps or one of each item.
|
 |
| Push-on style |
#4420 |
| Clamp-on style (tube diameter 1-3/8") |
#4421 |
| Breather Kit (1 pair breathers, tubes and clamps) |
#4422** |
| Breather Kit (1 each - breather, tube and clamp) |
#4423 |
| Push-on style with dirt shield |
#4424 |
| |
|
Air Cleaners
){kind=link}
){kind=link}
){kind=link}
){kind=link}