Edelbrock Customer Rides


Are you running Edelbrock product? Do you have a story about Edelbrock Products that performed beyond all of your expectations? Then click on the "Submit Your Testimonial" tab above and show us what you got and share your story with other performance enthusiasts. Check out some of our customers rides featuring quality Edelbrock Performance Products

Bill Malanca
Location: Clovis, CA
Edelbrock Parts Installed: Edelbrock Manifold and heads, and exhaust
HP and TQ: 500 WHP / 500 TQ
Testimonial: Excellent parts, well engineered, resonable priced, ease of instalation, and avalability.

John Chambers
Location: Kennewick, WA
Edelbrock Parts Installed: Edelbrock Manifold and 600 cfm carb
HP and TQ: 330 HP
Testimonial: The Edelbrock manifold and carb are great for the performance for my '26 Ford Tall T cpe.

Roger Cassman
Location: Phenix City, AK
Edelbrock Parts Installed: Edelbrock #3606, #21053, #41623, #4221
HP and TQ:
Testimonial: I have always used Edelbrock on my vehicles. I have a 68 Ford XL with a 390cid; I love this set up it was easy. it took my about 3 day to but the system in and that is because. I am a disable vet and can not work as hard as I use too I went from the 60 to 2000 . and it woke this ford 390 up. do not know about the HP put I am getting better mpg out of the veh as of rifgt now about 2-3 MPG.

Frank Dickerson
Location: Pottsville, AR
Edelbrock Parts Installed: Edelbrock Victor Jr heads and intake
HP and TQ: 580 HP / 520 TQ
Testimonial: The heads and intake combination made this Ford engine produce serious horsepower .

Robbie Wicker
Location: Oklahoma City, OK
Edelbrock Parts Installed: Edelbrock Pro-Flo 1000
HP and TQ: 120 HP / 140 TQ
Testimonial: I changed out my oem air cleaner with a Pro-Flo 1000.

Brian K Calderon
Location: Lebanon, OR
Edelbrock Parts Installed: Edelbrock Thunder 650 electric choke, RPM Air gap, K112133 Magnum Hydraulic Camshaft
HP and TQ:
Testimonial: 1971 Chevy C-10 Step Side, 1969 truck 396 310 HP stock. Frame off restoration.

Brian Craft
Location: Victor, MT
Edelbrock Parts Installed: Edelbrock #1405 Carburetor
HP and TQ: 350 HP
Testimonial: i bought the #1405 carb for my Chevy 350 small block that I'm building for my 71 chevy that my parents gave me for my first truck .

Brian Sypin
Location: Clarksville, PA
Edelbrock Parts Installed: Edelbrock LS Carb Intake Dual Plane
HP and TQ: 400+ HP
Testimonial: Great workmanship and quality product.

Don Schleich
Location: Freeport, NY
Edelbrock Parts Installed: Edelbrock CNC Aluminum BB Chevy Rectangular port cylinder heads, Victor series polished aluminum BB Chevy water pump, BB Chevy fuel pump, 6-71 BB Chevy Intake manifold, various fittings.
HP and TQ:
Testimonial: Been using Edelbrock accessories for many years on several different engines, always satisfied with the results.

Robert Spencer
Location: Gover, NC
Edelbrock Parts Installed: Edelbrock Carb, Intake, Heads, Air Cleaner, Valve Covers
HP and TQ: 400 HP
Testimonial: All parts mentioned above are all on my recently completed '68 Chevelle. People love to see under my hood at the shows.

Harold "Willie" Eltzroth
Location: Edwardsburg, MI
Edelbrock Parts Installed: Edelbrock Performer RPM Power Package
HP and TQ: 390 HP
Testimonial: My 1968 Ford Torino GT. Rebuilt engine in 2012 using Edelbrock Performer RPM Power Package. Lots of fun!

Lonnie Bishop
Location: Azle, TX
Edelbrock Parts Installed: Edelbrock 1903 Q JET
HP and TQ: 250-300 HP
Testimonial: Love the carb, lots of power and good fuel miles and fits like the original carb!

Ron Haynie
Location: Corona, CA
Edelbrock Parts Installed: Edelbrock 800 CFM Carburetor
HP and TQ: 425 HP
Testimonial: Runs great with no starting or idle problems. Lots of high rpm pull with no lack of gas flow to engine.

Rickey St. Onge
Location: Steger, IL
Edelbrock Parts Installed: Edelbrock endura shine intake and 4 bbl edelbrock 650 carb
HP and TQ: 385 HP
Testimonial: Love the triple chrome plated intake looks awesome.

Terry Efurd
Location: Fort Smith, AR
Edelbrock Parts Installed: Performer Air-Gap
HP and TQ: 380 HP 350 TQ
Testimonial: The air gap intake is the best intake i have ever used. Gave me the edge i needed gave great horsepower and also look great under the hood.

Don Teifke
Location: Waukesha, WI
Edelbrock Parts Installed: 800 CFM 1813 Carb, RPM Airgap 7501 Intake, RPM ETEC 200 Heads 60989
HP and TQ:
Testimonial: My 1986 Mazda RX7 swapped with a Gen1 SBC 383 stroker. LS-T56 trans and Mazda RX7 TII 8" IRS Posi differential.

Richard Marshall
Location: Banner, KY
Edelbrock Parts Installed: Edelbrock Intake and Carburetor
HP and TQ: 361 HP
Testimonial: Ran the Edelbrock intake in the IMCA and NASCAR series, NEVER have any problems with anything made by Edelbrock!

Adam Armstrong
Location: Beatrice, NE
Edelbrock Parts Installed: Edelbrock 2701 Intake
HP and TQ: 400 HP
Testimonial: Bought my Camaro awhile back and it was a basket case wrecked in the front with radiator support and small amount of frame horn damage rust free car this one has a new 355 in it I liked it so well I decided to spend the time to have her fixed got the hard part done...now time for interior.

John Beekley
Location: Evans, GA
Edelbrock Parts Installed: Edelbrock EnduraShine Intake
HP and TQ: 400 HP
Testimonial: This is my 67 Chevelle, I thought you may enjoy looking at my engine with EnduraShine intake.

Dave Huber
Location: Pleasure Ridge Park, KY
Edelbrock Parts Installed: Edelbrock Mechanical Fuel Pump
HP and TQ: 400 HP
Testimonial: This car was firest raced in 1960. The 1959 K 88 Dragster, by Bill Thornberry, Tom Severt and Porter Shrader. As a c/d Back in the day they raced this car all over and Winning. After about 1970 it was put in Storage in Porters basement. And took out of storage in 2003 and restores it for the first NHRR in Bowling Green, Ky. It was picked as a Bob Daniles pick ans went to the U S Nats.

Kenneth McCombs
Location: Kannapolis, NC
Edelbrock Parts Installed: Thunder Series Carb, Intake Manifold
HP and TQ: 400 HP
Testimonial: Enjoy my new carb and intake, works great.

Ben Wearley
Location: Huntertown, IN
Edelbrock Parts Installed: 750 Carburetor
HP and TQ: 440 HP / 550 TQ
Testimonial: This is my 68 bird with a 68 400 block that has eagle 461 stroker kit and the eddy carb. These carbs are so easy to tune. love it Thanks Vic!

Doug Gourley
Location: La Crosse, WI
Edelbrock Parts Installed: Performer 500 4 bbl Carburetor
HP and TQ: 135 HP
Testimonial: 1972 VW Bug, 1835cc. with Edelbrock 500 4 bbl. Custom paint with matching leather interior. American Racing wheels.

Brian Bonk
Location: Richford, VT
Edelbrock Parts Installed: Black engine accessories, gear drive, engine accessories
HP and TQ:
Testimonial: 54 Chevy pu, 350 fuel injected, 4L80E, runs and drives awesome! Thanks Edelbrock!

Brian Bonk
Location: Richford, VT
Edelbrock Parts Installed: E-tek heads, valve covers, gear drive enura shine air gap and water pump, Lots!
HP and TQ:
Testimonial: 34 Chevy truck, 7 inch chop, the best of everything, hot 327 with a 5 speed. "patina" paint. Shifty Business hit rods shop truck.

Brian Bonk
Location: Richford, VT
Edelbrock Parts Installed: Valve covers, air cleaner, timimg cover, gear drive
HP and TQ:
Testimonial: 49 ford F1, budget built shop truck. Runs and drives sweet! Lots of fun and trophies! Thanks Edelbrock!

Brad Hicks
Location: St. Robert, MO
Edelbrock Parts Installed: Rollin' Thunder hydraulic roller cam, Performer RPM intake, 650 cfm Thunder carb
HP and TQ: 370 RWHP / 401 RWTQ
Testimonial: I love my car a great deal and use nothing but the best. I have trusted Edelbrock for over 30 years and when I built this there was no doubt which way I was going! Fantastic street manners and plenty of pull - Love the combo!

Larry Stalions
Location: Medford, OR
Edelbrock Parts Installed: 1406 carb, 1721 fuel pump, 8123 Fuel line, 8131 carb feed hard line
HP and TQ:
Testimonial: Have used Edelbrock stuff for 50 years. These folks are stand up people and understand their customers. Great customer service and quality products.

R. Travis Walker
Location: Selinsgrove, PA
Edelbrock Parts Installed: E-Force Supercharger
HP and TQ: 511 RWHP / 516 RWTQ
Testimonial: We love the performance our Camaro has with the Edelbrock Eforce Supercharger!

Wayne Croslyn
Location: Palmetto, FL
Edelbrock Parts Installed: Edelbrock Intake Manifold, Carburator
HP and TQ: 300 HP
Testimonial: My father and i build hotrods in florida. We have found that edelbrock makes the best manifold for what we do . We recommend these to all our customers

Tim Barry
Location: Little Rock, AR
Edelbrock Parts Installed: Edelbrock Performer Intake, Carburetor
HP and TQ:
Testimonial: I love the out-of-the-box performance of Edelbrock equipment. Bolt it up and go!

David Mercer
Location: Vista, CA
Edelbrock Parts Installed: Edelbrock #1826 Carburetor
HP and TQ: 256 HP / 312 TQ
Testimonial: I learned a long time ago that Edelbrock carbs are the way to go for a true street/strip car. Now that applies to my 1979 Dodge Ramcharger. It has a 1826 AVS Thunder series off-road carb, 650 cfm. I had a 1406 before, the off-road difference is fantastic. The engine is a magnum 360 w/HughesRacing HR0814 cam and M1 dual plane intake. A NV4500, Dana300 and 4.56 gears and 33" tires round it out.

Dave Larson
Location: Phoenix, AZ
Edelbrock Parts Installed: Edelbrock #18064 Carburetor
HP and TQ:
Testimonial: Summer Carb Promotion - I returned the required purchase info to receive a $20 Visa card and a T-Shirt. I was quite surprised when the items arrived four days after the mailing. What a fantastic company!

Frank Tombo
Location: Poland, OH
Edelbrock Parts Installed: Edelbrock Fuel pump, Performer RPM heads, valve cover gaskets, and powder coated black valve covers
HP and TQ: 506 HP / 546 TQ
Testimonial: This is a work in progress, 63 dodge ramcharger clone, for shows only. had one 43 years ago. sold it to pay the bills when i was on active duty. too old to race this will be the third show car. happy with edelbrock.

Gregg Doerfler
Location: Oklahoma City, OK
Edelbrock Parts Installed: Edelbrock EDL-1405 Carb, Torker II Intake
HP and TQ: 350 HP / 300 TQ
Testimonial: Recently we had a fuel delivery problem. not sure if it was the carb or fuel pump. After speaking Smitty in Tech he offered to completely go threw our EDL-1406 FREE of charge to make sure it was correct! Yes Edelbrock offered to go threw my carb FREE to make sure it was right!!! Now that is what I call service and why I have use Edelbrock products on all my performance vehicles! Thanks Smitty!

Kaspar Schroder
Location: Frederiksberg, Denmark
Edelbrock Parts Installed: Edelbrock Top End Kit 2091
HP and TQ: 250 HP / 295 TQ
Testimonial: I've just installed the 2091 Top End Kit on my '69 Mustang 302/2V. I had it dyno'ed but didn't at all reach the power the Edelbrock team did. I know they test under absolutely perfect condition and that they test the engine, while I was testing the car. However I only got 295 lbs./ft. at 3800 rpm and 250 rwhp at 5000 rpm.

Ernie Mcconnell
Location: Wichita Falls , TX
Edelbrock Parts Installed: Tons Of Carbs And Performance Parts
HP and TQ:
Testimonial: We at Lone Star Muscle Cars Only Use Edelbrock Performance Parts Due To the fact of reliability for our customers and our own personal use.Whats Under Your Hood!

Michael Horner
Location: Mesquite, TX
Edelbrock Parts Installed: None Yet
HP and TQ:
Testimonial: While this Mustang (All original 1964 1/2) does not use any Edelbrock products all projects at my shop use Edelbrock carbs / intakes etc.

Clare Caruso
Location: Cartersville, GA
Edelbrock Parts Installed: Edelbrock intake and carb
HP and TQ: 275 HP / 259 TQ
Testimonial: This is my baby blaze 1966 chevy ii this a tribute to my late father he always owned on but they were all 6cyl he always want a 350. Love you dad!

Name: Brian H. Umstead
Location: Warwick, NY
Power Output: 426 RWHP
Installed by: JDM Engineering

"I have a 2010 Ford Expedition LTD 4x4 with the first ever E-Force supercharger package and installed it in Nov of 2011. I now have close to 20,000 miles and this runs great. Ridiculously fast. Even with a 3:31 rear it leaves a chirp going to second gear. Yet the vehicle is tame enough to drive in deep snow and for my wife to drive. I can cruise at high speed and still get decent mileage ~ 17-18 mpg at 75mph with luggage.
I had the vehicle tuned and dynode at JDM Engineering in New Jersey and run 426 RWHP. Edelbrock support has been excellent from day one.


Ken Wilson
Location: Riverside, CA
Edelbrock Parts Installed: Edelbrock 7521 air gap manifold
HP and TQ:
Testimonial: Just installed a new air gap manifold on my '64 Ranchero w/260 engine. The only other change was from a paper a/f element to a K & N. (14 dia. 2" ht. it used to have a torque manifold (installed by a prior owner). What a difference! You hit the gas and it takes off! I really like this manifold!

Carl Clinton
Location: Gresham, OR
Edelbrock Parts Installed: Edelbrock SCCA / ICSCC American Sedan Racing class heads and intake
HP and TQ: 400 HP / 367 TQ
Testimonial: These new American Sedan heads really work well in our racing SCCA / ICSCC American Sedan Racing class.

Richard Ahlers
Location: Copperas Cove, TX
Edelbrock Parts Installed: Edelbrock Victor Intake
HP and TQ:
Testimonial: My late father-in-law built the 23 Model T Roadster before he passed and would settle for nothing less than an Edelbrock Manifold for his dream car. We are proud to own the car now and truely enjoy it. The Victor Manifold just looks perfect with the single carb setup and delivers some amazing power. Thank you for providing a product that looks as good as it performs.

Raul Segredo
Location: Miami, FL
Edelbrock Parts Installed: Edelbrock E-Force Supercharger #1591
HP and TQ: 600 HP
Testimonial: I purchased a 2012 GS Convertible M6 new in. After hearing the positive commentary on the Edelbrock E-Force supercharger I elected to take the plunge.

I live in Miami and investigated the local installers and solicited quotes for doing the job. Ultimately, I ended up purchasing the kit from DynoSteve here on the forum (otherwise known as Steve Leerentveld at RDP Motorsport in Ohio, 440-358-5500) and had the installation done by Rob Koeppel (Forced Fuel Injection in Miami, 305-235-610).

I can't speak highly enough about either Rob or Steve and their respective companies. About a week after placing the order a big Edelbrock box (about 4' x 4' x 2') arrived at my office. Every single part required for the install was in there. Rob and his crew did a meticulous (bordering on neurotic) job of the installation. I received the car back with not a scratch nor a fastener not re-installed.

I mostly drive the car to work and had enjoyed how the original LS3's low end torque sponsors gratifying lazy shifting. I launch in 1st, shift to 3rd about 10MPH, and then 5th about 35MPH. The low end torque makes for a gratifying feel without a lot of shifting work. I didn't want to lose the bottom end and the E-force delivered in spades. Low end torque is improved and the car is simply content to tool around a parking lot or on the road anywhere above 500 RPM with chugging, fussing, or complaining one bit. It is amazing!

Reality is in my normal driving the extra power does not come into play. The extra torque makes the car more gratifying but it doesn't feel any faster when on my typical trip the engine rarely exceeds 2000 RPM. Get this beast on the highway, downshift to 3rd, mash on the throttle, and all of sudden you realize what 600HP feels like. It feels good. The speedo more resembles the tach. With a brief mash on the accelerator, the car vaults past 120MPH effortlessly. Obviously, exploiting the new found race in the car too often won't lead to anything good but it is sure nice to know it's there if you need it.

I couldn't be more pleased with Edelbrock, RDP, or Forced Fuel for their parts in helping me build a most gratifying super car a fellow can own for not too many $.


Darryl Bliss Jr.
Location: Gary, IN
Edelbrock Parts Installed: Edelbrock Performer Intake
HP and TQ: 450 HP
Testimonial: Plain and simple Edelbrock makes power! My dad built this car....he swears by Edelbrock!

Robert Jacoby
Location: Poway, CA
Edelbrock Parts Installed: Edelbrock Performer Manifold & Carburetor
HP and TQ:
Testimonial: I removed a Edelbrock tunnel ram and installed a Edelbrock carb 14054 & Manifold 27014 both in your Endura Shine. I just wanted to say Thanks. It looks great and runs great. It idle's and runs great right out of the box.

Dale Carter
Location: Petersburg , IL
Edelbrock Parts Installed: Edelbrock Performer 750cfm carb
HP and TQ: 500HP
Testimonial: After fine tuning the carb with right jets, rods and springs car runs just great for a day and weekend drag racing car. The ease of tuning the carb was just great and so easy to tune any one can do it. Thanks for the great products.

Dale Carter
Location: Petersburg , IL
Edelbrock Parts Installed: Edelbrock Performer 500cfm carbs (2)
HP and TQ: 290HP
Testimonial: When i built my show truck i put on a tunnel ram and two 500 edelbrock carbs that was 15 years ago and never had not one problem, also added edelbrock starter and edelbrock valve covers that work great and look good.

Thomas Hegland
Location: Lino Lakes, MN
Edelbrock Parts Installed: Edelbrock Performer intake, cam, lifters, springs and timing chain set
HP and TQ: 286HP / 320TQ
Testimonial: 1978 Pontiac Trans AM - Factory HO motor rated at 220HP - When I purchased this car, the engine was really in need of a rebuild. I labored over the right Cam to install. From the first pull on the Dyno, I knew I had made the right choice! The Performer package provided a GREAT streetable power band that made this Black Bandit TA an absolute Blast to drive.

Robert Bennett
Location: Carrollton, GA
Edelbrock Parts Installed: Edelbrock Carburator, Intake
HP and TQ:
Testimonial: This is my 1983 Ford T-bird. Everyone's always wanting the mustangs, but here's something a bit different.

Ryan-William Buchanan
Location: Toronto, Canada
Edelbrock Parts Installed: Edelbrock Head, Carburator, Intake
HP and TQ: 400HP
Testimonial: 1977 Chevrolet Camaro Z28 - Transformers Bumblebee Replica 5.7 Litre 400 HP V8, With B&M Shifter, Edelbrock Highrise Intake & Carburator, Edelbrock Aluminum Cylinder Heads, Comp Cams Valve Train, Flowmaster Exhaust System.

Bernard Langlais
Location: Montreal, Canada
Edelbrock Parts Installed: Edelbrock Head, Carburator, Intake
HP and TQ: 475HP / 468TQ
Testimonial: I have purchaed my motor from Engine Factory New Jersey who has built that Crate motor with Edelbrock parts. The motor was perfect from the first start to now. I have made 5,000 milles on it. The motor is very strong at very low rpm and has a wonderful noise. i average 17 mpg on higway. My car is a 1975 Camaro and i own it since 1978.

Gregg Remedes
Location: Castaic , CA
Edelbrock Parts Installed: Edelbrock complete hi-compression heads, cam, timing chain set, adjustable rockers, valve covers, intake manifold, timing chain cover, russell plumbing
HP and TQ:
Testimonial: Dec 2011 I started this build, today it is almost done.

Stacy A. Crabtree Sr.
Location: Hagerstown, MD
Edelbrock Parts Installed: Edelbrock Air Gap Dual Quad Set Up,Fuel Pump, Water Pump
HP and TQ: 500 HP / 400 TQ
Testimonial: 1932 Chevy Vicki (5-Passenger Coupe),350 ci.,TCI 350 Turbo Trans (Street Fighter Trans),10 Bolt GM Rear (373 gears),Flaming Rivers Manual Steering,4-Link Rear End, 4-Wheel Disc Brakes, This is a Driver and Show Car.

David Tittelmayer
Location: Philadelphia, PA
Edelbrock Parts Installed: Edelbrock Performer RPM manifold, Performer Carb, Performer cam, Victor Jr fuel pump
HP and TQ: 425 HP / 425 TQ
Testimonial: My 78 Camaro that was fully rebuilt by me with no help from others.

Doug Fetsch
Location: St. Louis, MO
Edelbrock Parts Installed: Edelbrock Air Cleaner
HP and TQ: 300 HP
Testimonial: Sweeeeeet!

Steve Makinson
Location: Sweet Home, OR
Edelbrock Parts Installed: Edelbrock Six-Pack mainifold
HP and TQ: 450 HP
Testimonial: 1970 Dodge Challenger 340 a66 performance package R/T options.

Michael Phelps
Location: Merryville, LA
Edelbrock Parts Installed: Edelbrock Thunder Series off road carb, Performer EPS Intake, Performer Plus Cam, Sure Seat Valve Springs, Edelbrock engine dress up
HP and TQ:
Testimonial: Definite torque and hp gain high quality american made performance.

Russell Hanberry
Location: Nashville, TN
Edelbrock Parts Installed: Edelbrock Thunder AVS Carburetor & Performer Air Gap Manifold
HP and TQ: 340 HP
Testimonial: We installed the Performer Air Gap Manifold feeling that it would provide the best performance for both the street and strip. Having had experience with Edelbrock manifolds during my dad's racing days, we knew it would get the job done. The Thunder AVS was decided on because of its design and ease of tuning without having to remove the entire carburetor for jet changes.

Kevin Cornine
Location: Hackettstown, NJ
Edelbrock Parts Installed: Edelbrock Intake
HP and TQ: 450 HP 450 TQ
Testimonial: This is my 69 olds 83k survivor, rollin w a olds 455 tci th400 373 posi a blast to drive.

Rigo Guzman
Location: Greenfield, CA
Edelbrock Parts Installed: Edelbrock E-Force Supercharger with Pulley, Ported heads and Nitrous
HP and TQ: 666 HP 714 TQ
Testimonial: Just had it tuned and really pleased with the efficiency of my blower.

Timothy N Hays
Location: Marshfield, MO
Edelbrock Parts Installed: Edelbrock 1221 Air Cleaner
HP and TQ:
Testimonial: I installed this on my 1990 Ramcharger and noticed the differance right away but was surprise to see there where no decals in the box would like them for my tool box...

Mark Mannino
Location: Bridgecity, TX
Edelbrock Parts Installed: Edelbrock Intake
HP and TQ:
Testimonial: I have a old dragster that was originaly bought out of an estate sale and then has been sitting in a garage for 25+ years I have it running and mostly back together, it has an eldelbrock intake with 4 stromberg 97s how rare is this? it also has a moon eye fuel tank and hand pump, Magnesium rims, Edmond heads, Banjo rear end, the original front tires and rims were in bad shape but I have kept them.

Jean Maltby (geno)
Location: Lakewood, WA
Edelbrock Parts Installed: Edelbrock Performer Carburator, valve covers & breathers
HP and TQ:
Testimonial: 1934 Dodge Pickup "Rattle Can Special" !

John Secor
Location: Canandaigua , NY
Edelbrock Parts Installed: Edelbrock Performer 1405 Carbs (2)
HP and TQ:
Testimonial: It's a 1965 MGB with a 383 stroker motor fed with two 600 Edelbrocks and helped by a 671 Dryer Blower.A3500 stall converter connects the engine to a bullet proof powergilde out to a shortend 9"ford. A fun car with an attitude.

Allen Ashby
Location: Las Vegas, NV
Edelbrock Parts Installed: Edelbrock Performer Intake 600 cfm Carb
HP and TQ:
Testimonial: 1960 Bel Air - Small Block Chevy with TH-400

Brian Willis
Location: Wellington, New Zealand
Edelbrock Parts Installed: Edelbrock Intake Manifold
HP and TQ: 200 WHP
Testimonial: This is my 1973 Chrysler CH Hardtop fitted with a factory 360 & 727 torqueflite. I guess it was Australia' answer to the 1970 Dodge Charger. Very rare car.

Kirk Kraft
Location: Temperance, MI
Edelbrock Parts Installed: Edelbrock Air-Gap Intake, 650 cfm carb etc
HP and TQ: 400+ HP
Testimonial: I can't wait to get this on the road next year 1969 Firebird all restored but not the same look.

Joe Wisher
Location: Martinez, CA
Edelbrock Parts Installed: Edelbrock Intake and carb
HP and TQ:
Testimonial: 1961 Impala saden 305 Cu inch / 350 Trans. Thank you for the Baseball cap at Hot August Nights you left in my car.

Dan Arnold
Location: Alpine, NJ
Edelbrock Parts Installed: Edelbrock Performer Intake and carb
HP and TQ:
Testimonial: Since installing the Edelbrock Performer carb & Performer intake manifold, plowing is much easier. A lot more torque, and cold starts are NO problem!

Joseph Jones
Location: Kinston, NC
Edelbrock Parts Installed: Edelbrock Intake and carb
HP and TQ: 300 HP
Testimonial: Great drivability with cab and intake.

Clearnie
Location: Gastonia, NC
Edelbrock Parts Installed: Edelbrock 1406 Carb
HP and TQ: 350 HP
Testimonial: Run good & look good on my 75 vette.

Anthony Westkamper
Location: Carlotta
Edelbrock Parts Installed: Edelbrock 94 Carb
HP and TQ: 650 HP
Testimonial: I installed your Edelbrock 94 Carb on my 56 F250 stock 272 "Y block" engine today. It required a custom throttle linkage, aircleaner, and a spacer to allow ball end throttle arm to clear the stock intake manifold. All this took over a month of intermittent fussing. But started on the first try! She's still a dirty girl, clean up comes after function.

Eddie L Coffey
Location: Lancaster, KY
Edelbrock Parts Installed: Edelbrock E-Force Supercharger
HP and TQ: 650 HP
Testimonial: My 2007 Z06 with a E Force Surpercharger.

John Danberry
Location: Beckley, WV
Edelbrock Parts Installed: Edelbrock Dual-Quad set up
HP and TQ: 500 HP
Testimonial: First dual quad,works perfect,great tech support,thanks Art,at Edelbrock,1970 Dodge Challenger R/T,built 440,est. 500 HP

Kristian Julen
Location: Vasteras, Sweden
Edelbrock Parts Installed: Edelbrock RPM heads and original 6 bbl
HP and TQ: 500+ HP
Testimonial: Driving a Roadrunner -69 1/2 A14 as an A12. Best so far is a 12.21 but is still improving. Drive with M/T Street radials 275/15. Six bbl is working good.

Bob Jacoby
Location: Poway, CA
Edelbrock Parts Installed: Edelbrock Tunnel Ram and Carbs
HP and TQ:
Testimonial: Tunnel ports look good.

Rick Cohn
Location: Tuscon, AZ
Edelbrock Parts Installed: Edelbrock Pro Flo fuel injection
HP and TQ: 355 HP 410 TQ
Testimonial: I got tired of trying to tune a carburetor for mpg. I decided to upgrade to Pro Flo and bring my 1958 GMC fleet option into the 21st century. Besides being easier to tune, I can store three distinct tunes for different situations; and the throttle response is fantastic! Pictured in front of my truck is "Kool Jake", my grandson. He's very anxious to get his driver's license and "borrow" my truck.

Mike Williamson
Location: Cuba, NY
Edelbrock Parts Installed: Edelbrock Performer 500 cfm carbs
HP and TQ: 550 HP
Testimonial: I've owned this car since 1985,It has had 2 frame off restorations, the second coming after I found this crossram intake on E-bay and it got me excited about my car again. It sits atop a ls-6 454 with Merlin heads, a crane roller cam, mallory ignition and twin 500 cfm edelbrock carbs....and it runs great and is fast. It has a th400 tranny transferring power to a moser 12 bolt 4.10 rear

John Dean
Location: Quinlan, TX
Edelbrock Parts Installed: Edelbrock multi-point EFI, Performer RPM aluminum heads, edelbrock shorty headers, performer rpm cam, roller rockers
HP and TQ: 450 HP
Testimonial: This is a 91 gmc ex cab that i purchased with theses comopnets installed its way quick and gets outstanding millage!

Tony Rarey
Location: Winlock, WA
Edelbrock Parts Installed: Edelbrock RPM Air Gap Intake, 1406 Carb , Valve Covers
HP and TQ:
Testimonial: Love your products. Makes my cj pure like a kitten.

Jim Daniels
Location: Aptos, CA
Edelbrock Parts Installed: Edelbrock performer dual Carbs, air cleaner, water pump and Fuel Pump
HP and TQ: 400+ HP
Testimonial: I love your stuff; it's so easy to use. Some " expert " told me I had the wrong carbs. I said B.S. Are you going to Hot August Nights in Reno ? I'll be there for sure.

Wendy Zedack
Location: Oak Ridge, NJ
Edelbrock Parts Installed: Edelbrock performer Carb, intake, air cleaner, valve covers
HP and TQ:
Testimonial: The carbs are great, love the ease of tuning them, use a 1406 on my 1972 chevelle, which i race at oldtime drag events.

Robert Boerner
Location: Columbus, OH
Edelbrock Parts Installed: Edelbrock performer Carb and Heads
HP and TQ: 350 HP 365 TQ
Testimonial: Had nova for 30years and doint plan on giving it up i use edelbrock on my car and all my other cars.

Rick Blanchard
Location: San Tan Valley, AZ
Edelbrock Parts Installed: Edelbrock performer 800 CFM Carb
HP and TQ: 502 HP 600 TQ
Testimonial: This the best carburetor I have ever used.

Jim Hughes
Location: Seattle, WA
Edelbrock Parts Installed: Edelbrock performer plus cam and lifters, new push rods, sure grip valve springs, performer manifold,rebuilt heads, new carb, fuelpump, egr, waterpump
HP and TQ:
Testimonial: This cam and lifter is way better than stock.

Norman Mullins
Location: New Salisbury, IN
Edelbrock Parts Installed: Edelbrock performer intake
HP and TQ: 165 HP
Testimonial: 1972 montel carlo, hope you like the pic, got alot of work to do... thanks

Steven Glassburn
Location: New Market, TN
Edelbrock Parts Installed: Edelbrock performer intake
HP and TQ:
Testimonial: BEST INTAKE EVER.

Jesse Perez
Location: Odem, TX
Edelbrock Parts Installed: Edelbrock 600 cfm performer series carb, performer plus cam kit, performer intake, chrome signature series valve covers
HP and TQ: 350 HP
Testimonial: I've been using Edelbrock parts for 3 years and couldn't be happier with the the quality and style that Edelbrock provides. I am in a car club here in Corpus Christi Texas named Limitless Customs. We recently entered my car in a car show and took first Place due to the overall look of the engine. I take great pride in my engine and I only use Edelbrock because they take pride in their products.

Greg Meindl
Location: Lime Rock, CT
Edelbrock Parts Installed: Edelbrock 1725 Fuel Pump
HP and TQ: 500+ HP
Testimonial: The fuel pump on my racecar failed. I ordered a replacement only to find out that Brand H now makes them in Korea ! The casting of the product was poor at best and I cannot risk my expensive motor to an inferior product. I promptly ordered up your product as its made in USA !!! The private sector isn't fine so thank you for keeping quality manufacturing in the USA. Come on back to LRP to race.

John DiCarlo
Location: Lockport, NY
Edelbrock Parts Installed: Edelbrock Performer Intake Manifold
HP and TQ: 500 HP
Testimonial: I have a 1971 chevelle ss with a 400 motor and a turbo 400 transmission i have an edelbrock performer intake manifold on it but hoping to put a performer rpm intake on this summer.

Jerry Forthofer
Location: Rockwell, NC
Edelbrock Parts Installed: Edelbrock LS Coil Covers
HP and TQ:
Testimonial: I had many positive comments on the coil covers with many people mentioning that it made the motor look like a big block. Combined with the other engine accoutrements, the engine was very popular at cruise-in's. What I particularly liked was that by mounting the coil packs directly to the covers, it allowed the covers to sit lower and completely hide the valve cover, thus appearing to be the valve cover. I did sell the car about four months ago to a fellow who really loved the look of the motor.

Brandon Lee Myers
Location: Spokane, WA
Edelbrock Parts Installed: Edelbrock Air Cleaner and Valve Cover
HP and TQ:
Testimonial: i love the way the air flows throw it! I i love the chrome valve covers, I will be buyiing more items for my car when i get my job!

Bill Johnson
Location: Mechanicsburg, PA
Edelbrock Parts Installed: Edelbrock Q-Jet 1901
HP and TQ: 350 HP
Testimonial: Twist the throttle and twist my head back!

Judy Krause
Location: Minot, ND
Edelbrock Parts Installed: Edelbrock Performer Intake Manifold and Carburetor
HP and TQ: 275 HP
Testimonial: Greatly increased hp from the stock engine application.

Pieter Viljoen
Location: Johannesburg, South Africa
Edelbrock Parts Installed: Edelbrock E-Force Supercharger, Edelbrock AVS Carb
HP and TQ:
Testimonial: I drive a Ford Courier LDV. Running a Chev Small Block, fitted with a Edelbrock E-Force Supercharger and Edelbrock AVS 800cfm Carb. Vehicle is home built and all work has been done by myself and my old man. Vehicle is making tremendous power. Feels like the power has doubled since fitting the supercharger. Next upgrade is Edelbrock Heads, and few other Edelbrock Goodies. Edelbrock's the BEST.

Paul Arntz
Location: Roermond, Netherlands
Edelbrock Parts Installed: Edelbrock PerformerIntake manifold, gear-drive and camshaft. Classic Series valve covers and oval airfilter
HP and TQ: 325 HP
Testimonial: I have used Edelbrock products on many of my own and customer cars over the last 20 years..and i like the way Edelbrock thinks and develop it's products. Keep it up.

Curtis Guynes
Location: Placentia, CA
Edelbrock Parts Installed: Edelbrock Performer Manifold, Performer Heads (2701 & 60909)
HP and TQ:
Testimonial: Big difference in jumping up from stock intake and heads to the Performer Series... Now, after having blow by I plan to go thru the bottom end and might as well bump up cam and switch to the new hyraulic roller lifter kit... Will be stopping by the shop or the trailer at the next show to discuss my options.

David O. Kyllo
Location: Wilmette, IL
Edelbrock Parts Installed: Edelbrock Carb, Intake, Shocks, Cam
HP and TQ:
Testimonial: I have used the Edelbrock Carb #1406 on my 1976 Corvette for several years. The car always starts and runs well. It is a great carburetor and I have suggested it to many friends. Now I wish that you would make a blower for carb mounting on an LS Engine, kind of a retro looking LS Engine. I would love to use that. Thank you for wonderful products. I love the IAS Shocks on my Buick Roadmaster.

Curtis Guynes
Location: Placentia, CA
Edelbrock Parts Installed: Edelbrock Performer Manifold, Performer Heads (2701 & 60909)
HP and TQ:
Testimonial: Big difference in jumping up from stock intake and heads to the Performer Series... Now, after having blow by I plan to go thru the bottom end and might as well bump up cam and switch to the new hyraulic roller lifter kit...Will be stopping by the shop or the trailer at the next show to discuss my options.

Bas Nossent
Location: Heeze, Netherlands
Edelbrock Parts Installed: Edelbrock Performer manifold/ performer plus cam
HP and TQ: 350 HP 600 TQ
Testimonial: We use this engine to launch gliders into the air. We just rebuild it after it has served us for 30 years. It is ready for another 30 years. It runs on LPG. The short block is a D1VE but I put E6TE heads on it. better quench, hardened exhaust seats etc. With the mild cam and manifold icw flat top pistons and the HEI ignition it does the job very well. It is running with the NNZC Veendam, Holland.

Dave Mullins
Location: Battle Ground, WA
Edelbrock Parts Installed: Edelbrock 1406 Carburetor
HP and TQ: 250+ HP
Testimonial: Engine is 302 GMC bored to 320 c.i., Edelbrock 600 CFM, Hicson headers; Mustang II PS; Ford 9"; 700 R4; Frame off.

Greg Walden
Location: Mt. Sterling, KY
Edelbrock Parts Installed: Edelbrock intake manifold
HP and TQ:
Testimonial: This is my 2002 S10. it was my first truck and is currently in the shop having the 4.3l vortec swapped with a small block 350. i am also having an edelbrock intake and holley 600 cfm carb installed. i look forward to driving it.

Dan Fatka
Location: Des Moines, IA
Edelbrock Parts Installed: Edelbrock intake manifold
HP and TQ: 400 HP
Testimonial: 1967 olds 442 455 .30 over. Excellent product easy to install for the novice or professtional, lightwieght to install, and the extra hourse power, and torque is awesome.

James Marino
Location: North Port , FL
Edelbrock Parts Installed: E Force supercharger
HP and TQ: 464 HP 453 TQ
Testimonial: Dear Mr. Edelbrock, thank you for designing not only a supercharger but one that looks OEM. I cannot beleive the power that your supercharger has added to my 2009 Challenger SRT8. Im very pleased with this supercharger and would highly recommend it to all other Challenger SRT8 owners who are looking to add horsepower to there ride.

Richard "Batman" Wood
Location: Tampa, FL
Edelbrock Parts Installed: Edelbrock 65mm throttle body
HP and TQ: 325 HP 370 TQ
Testimonial: I want more from edelbrock because you can depend on quality parts and reliable information. That comes from good research and development." Just the name is synomous with hot- rods and horsepower! Trust. When I upgrade my heads I will go with the edelbrock performer intake. The name of the car is the "trojan horse".

Russ Viafora
Location: Kissimmee, FL
Edelbrock Parts Installed: Edelbrock Performer intake, carb, fuel pump, cam and lifters
HP and TQ: 390 HP 410 TQ
Testimonial: I have a 48 chevy areocoupe, pro street, tubbed, motor done, th350 tranny, called..."orange crush".

Derek Stewart
Location: Tigard, OR
Edelbrock Parts Installed: Edelbrock Performer maifold, and Cylinder Heads.
HP and TQ: 495 HP 495 TQ
Testimonial: Here is a Rundown of a 388 chevy. Engine late model 350 block 60 over 3.75 stroke crank, 11.1:1 compression .029 quench distance comp XR282HR 230-236 .540-.550 110lsa 106ilc 1.6 rr arms. Fully Ported RPM 70cc heads Fully Ported 280cfm at .600 intake 230cfm ex by me 190cc runner Port Matched rpm intake 1-3/4 lt headers and holley ultra hp 750 but really wanted an 850, Thanks Edelbrock!

Robert Dening
Location: Australia
Edelbrock Parts Installed: Edelbrock Performer maifold, Edelbrock script rocker covers, air filter and performer camshaft and lifters.
HP and TQ:
Testimonial: Also had 600 carby, fuel pump and chrome fuel line, fuel filter and braided fuel line till i put the car on LPG. everything i fitted worked straight out of the box.

Joseph Polai
Location: Castle Rock, CO
Edelbrock Parts Installed: Edelbrock E-Force Supercharger
HP and TQ: 563 RWHP 551 RWTQ
Testimonial: The addition of the E-Force supercharger to my C6 Grand Sport were simply astounding...the car still drives like a completely stock C6, no rough idle, does not overheat in traffic, and runs on 91 octane fuel. It is so docile I can drive it every day. Put your foot in it and the car transforms into a 200+MPH rocketship...a true modern supercar.

Fabricio De La Casa
Location: Sao Paulo, Brazil
Edelbrock Parts Installed: Edelbrock Performer carburetor (1407)
HP and TQ: 500 HP
Testimonial: Beautiful, Cheap and very effective!

Andrew Brown
Location: Plano, TX
Edelbrock Parts Installed: Edelbrock Alum Cyl Heads, Water Pump
HP and TQ: 500 HP
Testimonial: I installed the Edelbrock heads on my 5.8L motor in 95. They have been a great product. Manufacturing in the US with quality tools, competitive processes and equipment is the way to go.

Jon Kornelis
Location: Ferndale, WA
Edelbrock Parts Installed: Edelbrock Performer Intake, and 650 cfm Carburetor
HP and TQ:
Testimonial: We added a new intake and carb hoping to up our fuel milage on our 1977 dodge motorhome. We were getting 6 miles to the gallon with the old cast iron intake and thermojet carb. We installed a performer intake and performer 650 cfm carb and the mileage went up to 7.6! While that doesnt sound very good, when you consider what we were getting, it is pretty good! Very happy with the performace also.

Corne Boshoff
Location: South Africa, LA
Edelbrock Parts Installed: Edelbrock Performer Intake, Cam and valve covers
HP and TQ:
Testimonial: I bought my 1973 Chevrolet El Camino in Cape Town, South Africa. I fitted a Chevy 283 small block with some Edelbrock products, she was pretty banged up when I bought her but she is looking much better now.

Greg Bess
Location: Lamar, SC
Edelbrock Parts Installed: Air Filter Kit
HP and TQ:
Testimonial: Best Auto Brand in the World!

Ryan
Location: Canada, Toronto
Edelbrock Parts Installed: None Yet (Stock)
HP and TQ: 225 HP
Testimonial: 1988 Mustang GT Custom.

Jeff Rubin
Location: Garden Grove, CA
Edelbrock Parts Installed: Edelbrock ProFlo LS1 XT Intake manifold
HP and TQ:
Testimonial: My Australian Holden Torana. Brought the car over here 11 years ago and just been upgrading and rebuilding it the past couple of years. I've transplanted an LS1 and 6 speed into it. Using the XT LS1 intake manifold. Done all the work myself including building the headers and exhaust, suspension work, custom big brake kit, air conditioning, etc.

Kjeld Jensen
Location: Copenhagen. DK
Edelbrock Parts Installed: Edelbrock Performer Carburetor and Intake manifold
HP and TQ: 250 HP
Testimonial: Edelbrock thanks for keeping my U.S. car running smoothly. Edelbrock 4ever!

Gregg Remedes
Location: Castaic, CA
Edelbrock Parts Installed: Edelbrock Cam and lifter set, dbl roller timing chain and gear set, timing chain cover, performer intake manifold and a pair of awsome valve covers
HP and TQ:
Testimonial: My 81 gmc 1-ton dually sierra classic with a 454 cid eng, th400 trnsmission with over 200k + miles on it was in need of some tlc. everything i removed off this engine was shot and everything i installed is hot. next step will be heads, headers and dress-up i will be able to tow my 5th wheel trailer cross-country yet. Thank you edelbrock for making it easy with your power package chart.

Rudy Perez
Location: Alamo, CA
Edelbrock Parts Installed: Edelbrock Performer 2101 Manifold with #1406 Carburetor
HP and TQ: 350 HP / 290 TQ
Testimonial: Finished my deuce on Sunday night. Left the next day for Victoria, B.C. to the Northwest Deuce Days event. Spent 12 days topless, driving 2580 miles and got 24mpg round trip. Best street combo yet. (GM crate 350/290HP with GM crate TH350)

Michael Powers
Location: Harrison, MI
Edelbrock Parts Installed: Edelbrock Performer Carburetor
HP and TQ: 290 HP / 250 TQ
Testimonial: I love it but....need more power!

Ryan Bean
Location: T or C, NM
Edelbrock Parts Installed: Edelbrock Performer Carburetor and Intake
HP and TQ: 360 HP / 380 TQ
Testimonial: i would like to put the edelbrock kit on my chevy 350 because i hear that they run good with that kit.

Jerry Pataki
Location: Rome, OH
Edelbrock Parts Installed: Edelbrock SBC Victor Jr Heads and Intake
HP and TQ:
Testimonial: HT 383 with HP 750 carb. , XE300HR cam , Victor Jr heads and intake . 11.40's and 50's at 118mph all season along with runner up in Modified... Thanks !

Wayne Grover
Location: Ramsey, MN
Edelbrock Parts Installed: Edelbrock Performer Intake
HP and TQ: 311 HP / 357 TQ
Testimonial: Started with a 165 hp motor and ended up with a 300 hp thanks to Edelbrock

Jon Moyers
Location: Lewisburg, PA
Edelbrock Parts Installed: Edelbrock Victor LS-R Heads for LSX
HP and TQ: 1050 HP
Testimonial: Had the opportunity to finally test the new set up using the LS-R head on a naturally aspirated 440ci lsx. The car went 8.51@ 159 mph weighing 3190 lbs. With some tweaks on the overall setup, this car will compete to be the fasted all-motor lsx in the country in 2012. Edelbrock has created a fantastic head, and Im honored to be leading the way in showcasing its potential.

Jacob
Location: Swartz Creek, MI
Edelbrock Parts Installed: Edelbrock Performer Carburetor
HP and TQ: 450 HP
Testimonial: This motor it 450HP The car Nova 1977 ss it good a carb!

Gary Binge
Location: Fairfax, VA
Edelbrock Parts Installed: Edelbrock Performer Intake, and Carburetor
HP and TQ:
Testimonial: GM Performance Parts 350 w/350 trans, 12-bolt, PS, PB. Edelbrock Endurashine Performer Manifold & Carb, Tuff-Stuff Alt & Power steering units. Hedman Headers, 2-1/2" SS exhaust through SS Hooker Aerochamber Mufflers. Bruce Horkey "Show Deck" bed. Early Classic Enterprises (ECE) 2-inch lowering Springs and Gas Shocks on all four corners.

Ted Langan
Location: Cerritos, CA
Edelbrock Parts Installed: Edelbrock Performer Intake, and Carburetor
HP and TQ:
Testimonial: 1966 Mustang Deluxe at Surf City.

Morgan Newton
Location: Blaine, MA
Edelbrock Parts Installed: Edelbrock Performer RPM 95ci package. Edelbrock Nitrous system
HP and TQ: 115 HP / 118 TQ
Testimonial: It hauls ass!

Andy Schram
Location: Rochester, MN
Edelbrock Parts Installed: Edelbrock E-Force Supercharger
HP and TQ: 450 HP / 500 TQ
Testimonial: I installed the E-Force kit on my 2008 Bullitt with some help from PowerHouse Automotive. The provided an intake elbow and tune file that allowed me to keep the cold air intake, Thanks to your tech crew for pointing me there way. I am very impressed with the performance. The GT500 owners in the area are as well!

Jim Rice
Location: Grand Ledge, MI
Edelbrock Parts Installed: Edelbrock 1406 Performer Carburetor
HP and TQ: 450 HP / 500 TQ
Testimonial: Thank's everyone involved with developing such a great carb. I run my truck all year around and some times it go's way below 0 here in Michigan and i can still always depend on my truck with the 600cfm carb installed on my 475/500tq 383. It runs great in all conditions and the choke works great. Thanks again and keep up the good work.

Danny Thomas Chavez
Location: Claremont, CA
Edelbrock Parts Installed: Edelbrock 1406 Performer Carburetor
HP and TQ:
Testimonial: I really like my new Edelbrock 1406 Performer Carburetor.

Eric Bartling
Location: Dillon, CO
Edelbrock Parts Installed: Edelbrock Performer Carburetor and Intake
HP and TQ:
Testimonial: Installed a new 1826 carb to replace a worn 1406 carb. more power and torque. I love it. mounted it on top of my performer intake. I have a lot of go fast goodies and this new carb really opened the trucks amc 401 up. Still cant believe it made that much difference. Always love edelbrock products and still not disipointed.

Steve Parrish
Location: Eminence, KY
Edelbrock Parts Installed: Edelbrock E-Force Supercharger
HP and TQ: 599 HP / 547 TQ
Testimonial: My uncle installed the 554 HP kit on my 07 C6 Vette & the install was seamless. What a difference in POWER! Kit #1593 was just offered in early 2011. I wish it could have been installed sooner, as the HP & TQ is unbelievable compared to stock. I am currently upgrading to the 599 HP/ 547 Torque option. I''ll provide f-back later when installed. The tech service dept will answer all your questions.

Oscar Marquez
Location: Rockaway, NJ
Edelbrock Parts Installed: Edelbrock Victor JR carb intake, Russell hoses and countless fittings and aluminum water pump
HP and TQ: 500 RWHP
Testimonial: I have owned this Bullet Green 1967 Mustang Fastback since 1982. I have slowly transformed it into the real all around street and the race track performer that it now is. The current motor is a naturally aspirated 351w stroked to 421Cid, it's backed by a built c4 automatic and 9" rear. My baby has run a best so far of 10.67 at 125mph and I have accomplish this on 17" drag radials. In August 2011 I ran the MMFF True Street event at Etown NJ during the Fords at ETown and managed a second place finish with an 11.01 average in the event. Thank you Edelbrock because without your proven and reliable parts I would not have accomplished this build.

Sam Fallin
Location: Fernandina Beach, FL
Edelbrock Parts Installed: Edelbrock E-Force Supercharger
HP and TQ: 460 RWHP / 428 RWTQ
Testimonial: As a DIY type of person, the E-force was perfect for me! A very straight forward, no hassle install and excellent instructions/technical support from Edelbrock. Big and stealthy power that comes on quick and continues up to the redline makes my Shelby GT a tremendous blast to drive! Thanks Vic!

Maciej Kilanowicz
Location: Warsaw, Poland
Edelbrock Parts Installed: Edelbrock Muffler
HP and TQ: 345 HP
Testimonial: In my country your company's products are hard to buy, so I just start my adventure with Edelbrock . My Dodge Ram Hemi just got a new muffler- it sounds great. I hope in my country Edelbrock products will soon easier to buy. And maybe I can help them.

Dan Berg
Location: Creston, ID
Edelbrock Parts Installed: Not yet, expect RPM and dressup.
HP and TQ:
Testimonial: Still in progress. 350 Chev and turbo 350 Tran.

Thomas Warren
Location: New Milford, PA
Edelbrock Parts Installed: Edelbrock Performer Intake, 1406 carburetor, Air cleaner
HP and TQ: 260 HP
Testimonial: 35 Chevy 5 window Masters coupe,68 nova subframe,350/350, 30 year project, on the road 2 years. Parts from all kinds of cars. 36 front,grille,headlights and hood.Base sbc from Jegs, Gearstar trans, Edelbrock intake and carb, Hurst Pro matic shifter. Built as daily driver. more story and pictures on Whatareyouworkinon and Dragracersreunion. P.S. car has no power anything. Bare bones FUN.

Daniel Charbonneau
Location: Sorel-Tracy, Quebec
Edelbrock Parts Installed: Edelbrock Performer Intake
HP and TQ: 425 HP / 480 TQ
Testimonial: Bought it new at 17 AND still own it!

Dick Kashdin
Location: Williamsville, NV
Edelbrock Parts Installed: Dual #1405 600CFM Carbs.
HP and TQ: 612 HP / 516 TQ
Testimonial: This long time Blown 1972 Pinto Drag Car made Street Legal, retired from racing to cruise nights and car shows. Featured on FAST NEWS AT FORD RACING as well as a National Invitational winner at the 2011 Ford Nationals in Carlisle, PA. Engine is a Ford 302 SB, Crane Cam and dual Edelbrock carbs atop a Dyer's 6-71 Blower. C4 tranny, 9 inch Ford rear with 4:11 gears and 18.5 inch wide rear tires.

Richard Burton Jr
Location: Lisbon, CT
Edelbrock Parts Installed: Edelbrock Performer 1406 carb, C3B manifold
HP and TQ:
Testimonial: Car runs nice cruising down the back roads or holding her own in traffic. Thanks for such good products to keep our cars running smoothly.

Russ Viafora
Location: Kissimmee, FL
Edelbrock Parts Installed: Edelbrock Performer RPM Air-GapIntake, Performer 600 cfm carb, 488/510 Lift Cam and Hydraulic Lifters, all edelbrock parts.
HP and TQ: 450 HP / 500 TQ
Testimonial: This is my 48 chevy aerocoupe pro street that ive been slowly adding to as i plod along in my older years; Someday i think i will be almost done. Car runs great down the street till i want it to go like hell, then it does, thanks to edelbrocks phone consultings...

Mike Reid
Location: Sudbury, Ontario
Edelbrock Parts Installed: Edelbrock Performer 600CFM Carb
HP and TQ:
Testimonial: It has a edelbrock performer 600 cfm carb, it works great for the street and the bush, hoping to upgrade to a fuel injection system this winter...

David & Diane Dalton
Location: Beltsville, MD
Edelbrock Parts Installed: Performer 2101 Intake Manifold & Performer Series 1406 Carburetor
HP and TQ: 350 HP
Testimonial: 1962 Corvette with 101,272mi. Still runs and looks good. Still loves to hit the pavement any chance it gets.

Jim Wilmot
Location: Issaquah, WA
Edelbrock Parts Installed: Russell hoses and connectors for all fluids and Edelbrock Cast aluminum valve covers
HP and TQ: 1100+ HP / 1050+ TQ
Testimonial: The US Army UL-9 hydroplane Driven by "Smokin Joe" Souza uses Russell connectors and braided hose. The engine uses cast aluminum Edelbrock valve covers. No leaks- ever!

Lynn Johanson
Location: Macomb, IL
Edelbrock Parts Installed: Edelbrock RPM intake, 750 carburetor, aluminum water pump
HP and TQ: 450 HP / 468this s TQ
Testimonial: Edelbrock parts have served me very well in the building and the driving of my '32 Ford. I trust and will continue to use Edelbrock products in the future.

Tony Bressler
Location: Belle Plaine, MN
Edelbrock Parts Installed: Edelbrock 1407 Carburetor
HP and TQ:
Testimonial: I'm using the 750cfm manual choke carburetor on my 1968 dodge charger which is not a show car but a reliable daily driver for the summer months. I have put 10000+ miles on every summer with this carburetor, I get an easy 20 mpg driving back a forth to work with the 318 and an A833 3spead o/d manual transmission. I used the Edelbrock carburetor because I needed a carburetor that won't leak, had to be easy to tune, stayed tuned and was reliable under all driving conditions; that is what I got.

Rick Kelley
Location: Horseshoe Bend, AR
Edelbrock Parts Installed: Heads and Valve covers
HP and TQ:
Testimonial: 1976 CJ7 with AMC 401,TH400 . Just a good all around trail rig.

Ryon Rickard
Location: Honolulu, HI
Edelbrock Parts Installed: Performer manifold and carb
HP and TQ:
Testimonial: 2011 Grand National Roadster Show First In Class. Runs great, drive anywhere. Carb was perfect right out of the box.

B Hasson
Location: Vancouver, WA
Edelbrock Parts Installed: Dual 1805 carbs
HP and TQ:
Testimonial: Carbs look nice and perform well. Tech support is excellent!

Michael S Bryant
Location: Salem, IN
Edelbrock Parts Installed: Nothing Yet. Soon to be though.
HP and TQ: 285 HP
Testimonial: 1932 Ford Sedan, Model B. Was my dad's until he passed in 2002. Have had it ever since and am slowly trying to fix it up the way he would have wanted. I miss him terribly and I think the ol' 32 does too!

Jerry Turgeon
Location: Diamond Bar, CA
Edelbrock Parts Installed: Edelrock AVI 650 thunder series carb, Edlebrock intake manifold, Cast aluminum valve covers
HP and TQ:
Testimonial: Your products put a nice finishing touch on my resto/mod 1977 Toyota Landcruiser with a SBC 350 V8.

Roger Hutzkal
Location: Campbell River, British Columbia
Edelbrock Parts Installed: Edelrock Intake, carb, pumps
HP and TQ: 440 HP
Testimonial: Love the parts, would like to put a new motor in my ride and a high rise intake with duel carbs, shows great at the show's.

Tim Magdaz
Location: South Daytona, FL
Edelbrock Parts Installed: Edelrock AMC Performer RPM Power package
HP and TQ: 440 HP
Testimonial: I installed the performer rpm power package in my 1969 AMC AMX. WOW!! RUNS GREAT.

Chris Stock
Location: Lake Elsinore, CA
Edelbrock Parts Installed: Edelrock Performer Intake, soon to be 1406 carb
HP and TQ:
Testimonial: Have a Beautiful and original 1966 Ford F250 with a 352 v8, Amazing truck with only 38k original miles. im 18 and i am the second owner, and the last owner. till my kids get it. Soon to have lots of edelbrock under the hood when i can afford it!

John Buce
Location: Graham, WA
Edelbrock Parts Installed: Edelrock Air-Gap Polished Manifold, manual fuel pump
HP and TQ: 377 RWHP
Testimonial: 1967 SS 350 camaro real 4P car with factory bench seat and rare Forged alum. SS200 cragar mags. Column shift, Red on Red. March pullies.

Chris Martin
Location: Citrus Heights, CA
Edelbrock Parts Installed: Edelrock Tunnel Ram, Dual 600 CFM Performer Carbs
HP and TQ: 425+ HP
Testimonial: Everybody Loves My Tunnel Ram! She looks like she's going 100 MPH while standing still! She's a blast to drive and she runs Great!

Steve Richey
Location: Compton, IL
Edelbrock Parts Installed: Edelrock Nitrous kit
HP and TQ:
Testimonial: My Edelbrock Nitrous kit works excellent

Gary & Sue Tolley
Location: Cannelton, WV
Edelbrock Parts Installed: Edelrock Carburetor 1407
HP and TQ: 800+ HP
Testimonial: I bought this truck in 78 now has a 429 super cobra jet engine, my son drives it on weekends.

James Minino
Location: Omaha, NE
Edelbrock Parts Installed: Edelrock Performer Intake
HP and TQ: 300 HP
Testimonial: A good all around intake for a big car.

Joseph Orsini
Location: Dove Canyon, CA
Edelbrock Parts Installed: Edelrock Cylinder Heads, Edelbrock Dual Quad Kit (2609), Edelbrock Water Pump, Classic Series Valve Covers
HP and TQ:
Testimonial:

Ed Buckley
Location: Marrero, LA
Edelbrock Parts Installed: Edelrock E-Force Supercharger
HP and TQ: 599 HP
Testimonial: Just wanted to let you know how much I love my new Supercharger. I've had it about 2 weeks now & it really is "Super". It was great not having to change my hood & no one knows I have a Supercharger under it. I call it my "Stealth" Supercharger. I had the rails painted Torch Red to match my Exterior & it looks great, see photo. Thanks for having this kit available.

Michael A D'Arezzo
Location: Methuen, MA
Edelbrock Parts Installed: RPM heads/IAS shocks/Long Aluminum water pump
HP and TQ:
Testimonial: Edelbrock helped me power my 1979 Firebird to become Tims Speed & Custom Street Eliminator Rookie of the Year at New England Drag way, while maintaining a smoother ride than my daily driver.

Dakota Turnham
Location: Enid, OK
Edelbrock Parts Installed:
HP and TQ: 250 HP / 250 TQ
Testimonial: You have made all kinds of superchargers for all kinds of cars but you have made any for the 06-07 Monte Carlos. It would be great for the people that want more power out of that type of car but no one has ever made one for the Monte Carlo.

Pat O'Connor
Location: Folsom, CA
Edelbrock Parts Installed: 2750 Edelbrock Intake Manifold and a 600 Edelbrock Carb
HP and TQ:
Testimonial: Jason & Pat installed a Edelbrock Intake Manifold and a 600 Edelbrock 4 barrel carb on top of their 351C in their 70 Mach 1 that Pat's owned since 1980, and it sounds GREAT.

Joh Howland
Location: Conneaut, OH
Edelbrock Parts Installed: Edelbrock Performer RPM II intake & elbow
HP and TQ: 374 RWHP / 360 RWTQ
Testimonial: Run's 11.70's @ 116 mph and still gets over 20 mpg. Thanks for a great product.

Johnny Espinoza
Location: Los Angeles, CA
Edelbrock Parts Installed: Edelbrock Air Cleaner
HP and TQ:
Testimonial: Soon the rest will follow first car and first thing i got for it was that edelbrock elite air in take its sweet now just taking my time to bring her to life again cant wait till it has all edelbrock under my hood cuz that 350 sounds great.

Corey Spetifore
Location: Campbell River, BC
Edelbrock Parts Installed: None Yet
HP and TQ: 290 HP / 300 TQ
Testimonial: After I read all of the testimonials about the quality of Edelbrock parts, I am convinced that Edelbrock is not a fancy name in a red logo which throws quality and performance to the wind, but rather a company who takes pride in building professional components for all vehicles. Subsequently, I will be adding a carb and intake to my 351W in my 1969 Mustang. I'm glad you build your stuff in the US.

Walter WIlliams
Location: Lauderdale, MS
Edelbrock Parts Installed: Edelbrock Air Cleaner
HP and TQ: 350 HP
Testimonial: I built this myself. It has a 402 BB Chevy engine, headers, dual exhaust, small rv cam, muncie 4 speed tranny, hurst competition shifter. Runs pretty good. I want to put an edelbrock intake and endrashine carb on it one day.

Mike Doke
Location: KIngwood
Edelbrock Parts Installed: Edelbrock Performer Heads
HP and TQ: 300 HP
Testimonial: i am pleased with the performance of the performer alm. heads.

Randy L Haukap
Location: Alhambra, IL.
Edelbrock Parts Installed: Edelbrock 600 CFM Performer Carb. w/ a Performer RPM Intake
HP and TQ: 300 HP
Testimonial: 1968 Mustang Coupe. Factory V8, a/c, p/s, p/b. I installed a 600 cfm performer carb. & intake, what a difference it made.

Matthew Hutton
Location: Rittman, OH.
Edelbrock Parts Installed: Edelbrock Performer Intake and Carberator, Strut Tower Brace
HP and TQ: 30 OHP
Testimonial: love your guys products...never had any problems! its its been a long seven year project given to me from my father, but i enjoy it. my family loves to go to car shows with me. my son is a future car nut like his daddy.

Roger E Dickson
Location: Chisholm, MN.
Edelbrock Parts Installed: Edelbrock Performer Intake and Carberator
HP and TQ:
Testimonial: 1975 Dodge D100 custom Restoration project that I replaced the Carter 2brl with an Edelbrock intake and 600 Performer 4brl Carb and Engine dress up kit

George Beck
Location: Stafford, VA.
Edelbrock Parts Installed: Edelbrock Performer RPM W/600 Carb
HP and TQ: 290 HP / 332 TQ
Testimonial: 1929 Willys-Knight 4-door sedan. Finished in Burgundy Metallic over a upholstered Gray tweed interior. Goodrich crate Chevrolet 350ci V8 engine, 290 horsepower and 332 ft lbs of torque, mated to a Turbo-Hydromatic 3-speed. Original chassis w/Mustang II independent front suspension with rack and pinion steering.

Richard Metzger
Location: Lake North, FL.
Edelbrock Parts Installed: Edelbrock 257 Intake
HP and TQ: 275 HP
Testimonial: 1946 Ford Rat Rod Pickup, , 272 Ford Y-Block, 257 Edelbrock Intake with (2) Autolite 4100 Carbs. 312 Supercharger cam with high lift rockers.

Sinbad
Location: West Bend, WI.
Edelbrock Parts Installed: Vic Jr Intake / Vic Jr 64cc heads / Performer RPM Nitrous kit w/ RPM activator box / Edelbrock Alum water pump / Adjustable GM A-body rear upper control arms / Elec fuel pump
HP and TQ: 505 HP / 545 TQ
Testimonial: 5 time HRPT Long Hauler- Get in / fire it up / hang on. In that order. always reliable and consistant. THANK YOU "BIG RED MACHINE" for all the horse power!

Kevin Wolbach
Location: Macungie, PA.
Edelbrock Parts Installed: Edelbrock E-Force Supercharger, Pulley, CAI
HP and TQ: 505 RWHP
Testimonial: With the help of the Edelbrock tech staff and Jason Snyder my mustang is areal performer and head turner. Every time I show the car I get endless questions about the E-Force. How much power does it make, was it hard to install,etc. I feel like an Edelbrock spokesman every show. I always tell them the car is a real animal and the Tech support from Edelbrock is top notch! Drag radials next! THANKS

Bruce Houdek
Location: Parma, OH.
Edelbrock Parts Installed: Edelbrock 1406 Carb, 289 Performer Intake
HP and TQ:
Testimonial: I have an awesome 1968 f100. Everything is basicly new on it, except the engine and trans. I am planning on rebuilding the trans this spring. Also I am applying a roll on bed liner. I am very happy with the performance of this truck.

Bill Hobson
Location: Grapeland, TX.
Edelbrock Parts Installed: Edelbrock 1406 Carburetor
HP and TQ:
Testimonial: This carb handles my 454 cu.in. Chevy one ton and still gets good gsa milage. Looks good too!

Charles Bender
Location: San Diego, CA.
Edelbrock Parts Installed: Edelbrock LT4 Intake Manifold
HP and TQ:
Testimonial: Just retired from the Navy after 20 years, I can now enjoy it. 94 Trans Am. I just had the 350 replaced with a Golen 383. It has AFR LT4 Eliminator 195cc heads, CompCam 280 XFI cam 230\236 duration .576\.571 lift, 1.5 rockers, Summit 58mm throttlebody, Mahle forged pistons, 30lb Ford High Flow Racing injectors, Flowmaster exhaust. converted to functional Ram Air.

Ron Daugherty
Location: Pocatello, ID
Edelbrock Parts Installed: Edelbrock Heads, Manifolds, Carb
HP and TQ: 455 Buick/ 280 HP
Testimonial: I acquired my '71 Boat-tail from my last living Uncle. It was then and is now the best quality car for driving and performance I've owned in a long time. Of my 27 streetrods in various makes and models, our Buick is most comfortable and naturally classy.

Bill Blakeley
Location: Whitesboro, TX
Edelbrock Parts Installed: Edelbrock Classic Series Valve Covers
HP and TQ:
Testimonial: I plan on handing this car down to my daughter.

Frank Edqvist
Location: Hogsater, Sweden
Edelbrock Parts Installed: Edelbrock Intake
HP and TQ: 350 HP
Testimonial: This is my 71 SS Camaro with 355 engine and th700 aut 12-bolt rear axel.

Albert Nieuwenhuis
Location: Burgessville, CA
Edelbrock Parts Installed: Edelbrock Valve covers, Shorty Headers
HP and TQ: 350 RWHP
Testimonial: Edelbrock is great! They sell an incredible selection of high quality performance parts for just about any make or model. Easy to use website... lots of great service. Keep it up!

Anthony Farah
Location: Dubai, UAE
Edelbrock Parts Installed: Edelbrock RPM XT manifold
HP and TQ:
Testimonial: I bought my trans am firebird and its modified and i sent it to Dubai where i work now and i want to increase its power. So if there is anything i can do i would like to have supercharger to my car.

Gary Aden
Location: Solona Beach, CA
Edelbrock Parts Installed: 650 CFM Carburetor
HP and TQ:
Testimonial: Edelbrock parts on the engine include the carb and manifold as well as very attractive valve covers. They are what everyone notices when the hood is raised and I always get good comments.

Eliezer Ramos
Location: Joliet, IL.
Edelbrock Parts Installed: 500 CFM Performer Carb, Performer Intake
HP and TQ:
Testimonial: I installed this combo on my 67 mustang. I love it.... It's easy to use and instal right out of the box. Im working on a 69 camaro im installing a 400 pontiac motor but im getting your intake and carb plus the valve cover.

Antwoin Anthony
Location: Yorktown, VA
Edelbrock Parts Installed: None Yet
HP and TQ:
Testimonial: Beautiful truck that needs performance work.

Lynwood Loehr
Location: North Augusta, SC
Edelbrock Parts Installed: Edelbrock Performer Series carb, Edelbrock intake manifold.
HP and TQ:
Testimonial: I've been very happy with the performance of my edelbrock intake and carb!

Tyler
Location: Jeffersonville, VT
Edelbrock Parts Installed: Edelbrock Performer series carb, Edelbrock valve covers, Edelbrock intake manifold.
HP and TQ: 340 HP / 380 TQ
Testimonial: I got this car when i was 15 the car was a total disaster it needed work everywhere ran it in bad condition for two years faulty alternator caught it on fire so i decided to just take it apart a redo the whole car.

Ed Sultan
Location: Denver, CO
Edelbrock Parts Installed: 2102 Performer Plus Cam, Performer Heads, Air Gap Manifold, Edelbrock Logo valve covers and Water Pump.
HP and TQ:
Testimonial: I couldn't be happier with the fit, finish and performance of everything I purchased from Edelbrock. Everything is top notch and trouble-free.

Arthur Hoge
Location: Calhoun, GA
Edelbrock Parts Installed: Edelbrock Performance 1407 Performer Carburetor
HP and TQ: 508 HP / 485 TQ
Testimonial: Wouldn't have any other carb on my engine. It gives me the power curve I want and the streetability and gas mileage I need. My ride is a 2000 S-10V8 swap pickup truck.

Jerry Harman
Location: Jenks, OK
Edelbrock Parts Installed: Edelbrock Performance alum heads, tall alumn valve covers, roller rockers
HP and TQ: 415 HP / 423 TQ
Testimonial: Owned since new. complete restore with tune port FI. Many mods to improve driveability. You don't see many of these restored. Quality Edelbrock parts installed throughout.

Eric C. Shirley
Location: Faribault, MN
Edelbrock Parts Installed: Edelbrock Complete 351w Performer RPM Ppower Pack. Heads, intake, cam, and 800 cfm carb
HP and TQ: 400 HP / 412 TQ
Testimonial: Growing up I have been around a lot of Edelbrock products. I have always loved the look, the feel, the power they provide. My latest car has so much Edlebrock in it and I am completely happy with everything. Totally will continue to buy more in the future.

Krahmuller Andreas
Location: Rohrnbach, Germany
Edelbrock Parts Installed: Edelbrock Intake Manifold
HP and TQ: 329 HP
Testimonial: Chevrolet El Camino 69.

Mark Orme
Location: Perth, Austrailia
Edelbrock Parts Installed: Edelbrock Twin 500 thunder carbs, Air-Gap Intake Manifold, rocker covers, and air cleaner
HP and TQ:
Testimonial: Hi guys here is a pic of my 59 vette trying to get it to handle and perform like a true sports car shes had some serious mods to suspension steering and drive line , the parts look and perform great. cheers

Jim Oltman Jr
Location: Elkhart, IN
Edelbrock Parts Installed: Edelbrock Air-Gap intake
HP and TQ: 600 HP
Testimonial: Made in the USA what more can I say.

Jens Nybo
Location: Copenhagen, Denmark-Europe
Edelbrock Parts Installed: Edelbrock Performer intake, Heads, valvcovers
HP and TQ: 400 HP
Testimonial:

Tim Hoffman
Location: Orange, CA
Edelbrock Parts Installed: Edelbrock Performer intake, carburetor, air cleaner lid, air-fuel-ration meter, and russel fuel lines.
HP and TQ: 340 HP / 410 TQ
Testimonial: I love Edelbrock parts. I've always run Edelbrock intakes and carburetors. I'm glad you've kept the Q-Jet and AFB going, while improving them quite a bit too. The owners manuals/tuning guides are excellent. The design, workmanship, and support of your products is top notch. I appreciate your support of the hobby too. Great seeing you at Coronado Speed Festival and all the other events you attend.

Alex Brown
Location: Los Angeles, CA
Edelbrock Parts Installed: Edelbrock Performer Carburetor
HP and TQ: 300 HP / 340 TQ
Testimonial: Here is a pic of my elcamino... still need work but it's my baby!

Rusty L. Picard
Location: Corrales, NM
Edelbrock Parts Installed: Edelbrock E-Force Supercharger
HP and TQ:
Testimonial: It took less than a day and a half to install the street legal E-Force kit on my 2008 GT convertible. Several buddies stopped by to help. All are car enthusiasts, but none of us had ever installed a blower on a car before. The installation was flawless. When it was finished, I intended to bump the starter just to verify everything was turning freely, but the engine fired before I could release the key. The engine runs great, and the car is a pure joy to drive. I live in the high desert area around Albuquerque. At 5,500 altitude my stock 4.6L pony was having difficulty breathing. With the E-Force supercharger installed, my pony runs like a thoroughbred.

Larry Hall
Location: Emporia, KS
Edelbrock Parts Installed: Edelbrock Trippe-Deuce Intake manifold
HP and TQ:
Testimonial: 1932 Ford Roadster, channeled 4 inches over deuce rails. I used the Edelbrock, Three-Deuce intake manifold, along with the very good-looking old-school Edelbrock Classic finned aluminum valve covers, and other Edelbrock parts,when they all come together, I always get the look that I want. But the best thing about Edelbrock is "MADE IN USA", and it don't hurt that it all begin in KANSAS!

Jack Maye
Location: Orangevale, CA
Edelbrock Parts Installed: Edelbrock Intake manifold
HP and TQ: Stock 120 HP
Testimonial: After restoring my 1948 Lincoln Convertible Coupe last of the V12s and one of 16 known to exsist. I added a vintage Edelbock 2x2 intake that really brought the old V12 to life. It will cruise at 75 all day while still getting 17-18 mpg.

Billy Carpenter
Location: Shady Side, MD
Edelbrock Parts Installed: Edelbrock Performer RPM heads & Victor intake
HP and TQ: 964 HP
Testimonial: Running a tradional Pontiac 535c.i. motor W/ Nitrous my 3650lb car has run a best of 8.26 @ 165 mph.

Cordon
Location: Baarn, Holland
Edelbrock Parts Installed: Edelbrock Performer Carburetor, Valve Covers, Performer Intake
HP and TQ: 300 HP
Testimonial: Love edelbrock stuff in my nice pontiac garnd luxury le mans sport coupe 1975.

Michael Little
Location: Kingston, Nova Scotia
Edelbrock Parts Installed: Edelbrock Valve Covers and Breather
HP and TQ:
Testimonial: Bough my truck 15 years ago decided 5 years ago to do some custom work to it and see the results for yourself.

Dan McDonald
Location: Winnipeg, Canada
Edelbrock Parts Installed: Edelbrock Performer Intake Manifold, 4 bbl Carb and linkage parts
HP and TQ: 300 HP
Testimonial: I think Edelbrock products are great, had no problems with the products at all!! Will continue to use them and tell others.

Jerald Knudson
Location: Walla Walla, WA.
Edelbrock Parts Installed: Edelbrock Performer Series 1406 Carburetor
HP and TQ: 305 HP
Testimonial: I give praise to the carb, and support from a phone call to EdelBrock tech. After 9 years with the carb the Tech from Edelbrock told me how to clean the inside of carb and runs perfect again.

Mike Pozzetta
Location: Colchester, CT.
Edelbrock Parts Installed: E Force Supercharger #1508
HP and TQ: 427 HP / 396 TQ
Testimonial: I had the 1508 installed on my 2008 Mustang Bullitt at a local speed shop. They know their work and the kit is dialed in right. The acceleration is smooth and powerful without any lag or hesitation. It is a hoot to drive. Embarrassed an Infiniti M today. I'm sure there will be more. Sweet!

Scott Schaaf
Location: Dolton, IL.
Edelbrock Parts Installed: 500 cfm Performer Carburetor
HP and TQ: 375 HP / 375 TQ
Testimonial: 1932 Ford 3-window, 327 Chevy, Muncie 4 speed, 57 Chevy rear end, Olds tilt column, Mustang steering box, Pontiac buckets, rumble seat, U.S. wheels M/T tires.

Joe Paczkowski
Location: Plainfield, IL.
Edelbrock Parts Installed: None Yet
HP and TQ: 411 HP / 390 TQ
Testimonial: 2011 5.0 gt mustang sterling gray . happiest guy on the block . stock running in the 12 sec. bone stock, hats off to ford. ran the track a 2005 ls1 gto wanted to race. i did put him in his seat on the 1/4 run what a day it was, you sould have seen his face after the race. :)

Paul Morton
Location: London, UK.
Edelbrock Parts Installed: RPM Heads, Rolling Rockers, Valve Covers, Air Cleaner, Fuel Pump, Inlet Manifold
HP and TQ:
Testimonial: Ford 1955 zodiac running a custom built 302, a custom built c4 box. a heavy duty custom 9in axle 6 point roll cage street legal.

Robert Brown
Location: Santa Ana, CA.
Edelbrock Parts Installed: Performer Carb, Electric Fuel Pump, etc...
HP and TQ: 385 HP / 400 TQ
Testimonial: I have several Edelbrock products installed on my 1950 Chevy Coupe. So far I have installed a Performer Series carb, electric fuel pump and relay kit, Idle compensator, as well as Russell fittings Each product performed as stated or better, came with easy to follow instructions which are also online, and great customer support. I also like the fact that each product is made in the USA.

Ryan Senne
Location: North Branch, MN.
Edelbrock Parts Installed: Intake manifold, Cam Shaft and valve train
HP and TQ: 400+ HP
Testimonial: My car is a 1966 Ford Mustang with modified 289 engine. It has been bored and stroked to approx 340 cu inches. A performance intake, 650 cfm carberator, roller rocker valve train and high compresion pistons. It has a 3:73 Currie positraction rear end with disk brakes. The car has suspension stiffners and traction lock bars. The car is painted with a 3 stage Dupont Brandywhine color scheme.

Guy Douglas Ogan
Location: Abilene, TX.
Edelbrock Parts Installed: Performer Intake with Thunder 1806 (650cfm) Carb, Performer Heads, Edelbrock NOS Kit
HP and TQ: 328 RWHP / 389 RWTQ
Testimonial: I love Edelbrock's "Made Right, Right Here in America" attitude. His parts give great performance, yet are far more "streetable" than others & at a reasonable price with friendly tech support if needed. I've got Edelbrock on both the Dart Iron-Eagle 363 ci Torque Engine now in my 66 Mustang Convertible (above) as well as the 332 ci stroker on my 66 Mustang's original 289 now in storage.

Drew Solomon
Location: Longmont, CO.
Edelbrock Parts Installed: Performer intake and carb
HP and TQ:
Testimonial: Love that they are MADE IN THE USA and the ease of working on them.

Zach Brooks
Location: Buckley, WA.
Edelbrock Parts Installed: Edelbrock Performer RPM
HP and TQ: 367 HP / 345 TQ
Testimonial: All parts installed on 355 ci chevy in 1996 silverado. Built the motor when i was 16, converted to carb and added a mild cam. New top end and bigger cam should net 450+ hp goal for a different 1996 Silverado!

Bob Price
Location: Salem , OH.
Edelbrock Parts Installed: Many
HP and TQ: Not Enough
Testimonial: My 81 chevy malibu (HELLFIRE) stock bottom end 350 .030 over piston dart 2.02 heads weind team g intake holley 750 dp csr elec. water pump th 350 race trans 3800 stall converter kenny thomas 12 bolt rear with 4.56 gears weld draglite wheels 26x4 fronts 28x9 hoosiers in back runs low 12's consistanly @112 in the 1/4 "new moto for hoosier big burnouts rock" thanks for the awsome photo babes.
Edelbrock Parts Installed: Ajustable Upper Control Arms
HP and TQ: 780HP / 675 TQ
Testimonial: Buick T-Type: (Completely rebuilt motor and my wife.)
Date Posted: 8-11-10

Gerhart Mickschl
Location: Ontario, CA.
Edelbrock Parts Installed: Intake Manifold and Perfromer Carburetor
HP and TQ: 450HP
Testimonial: 1976 nova with a 468 Big Block 400 trans and a posi rear end with 3.73 gears...only bad thing about the car is that the housing on the rear end is a 7 1/4 the smallest chevy made.

Neil Mason
Location: Gainesville, FL.
Edelbrock Parts Installed: Russell AN Fuel Fittings
HP and TQ: 86HP
Testimonial: The University of Florida Gator Motorsports looked to Edelbrock/Russel Performance when we needed precise AN fittings for our inline fueling system. Thankfully, Corina Geyer was able to help us access Edelbrock's generous support for educational programs like ours. Our fueling system is now back together and delivering a steady 300kPa +/- 15kPa.

Lew Rice
Location: Elgin, Sc.
Edelbrock Parts Installed: Edelbrock Manifold, Carb, and Exhaust
HP and TQ: 405HP
Testimonial: Installed your intake parts 4-5 yrs ago and have never had a starting problem. Your pre-set carb has been a wonder!

Ron Ream
Location: New Freedom, Pa.
Edelbrock Parts Installed: Edelbrock E-Force Supercharger #1580
HP and TQ: 427HP 396TQ
Testimonial: My 2009 Bullitt Mustang is now much more fun to drive. On a recent road trip to Texas and back, it was both very entertaining and extremely reliable. No problems at all.

Brian Mobley
Location: Placerville, Ca.
Edelbrock Parts Installed: Edelbrock E-Force Supercharger
HP and TQ: 466HP 439TQ
Testimonial: Installed the E-Force supercharger, 5psi. Perfect to keep my pony street legal and still am able to walk away from most vehilcles. I have the 4.6 ltr (281) and embarrased a stock 5.7ltr corvette with his girlfriend in it. I think he slept on the couch that night (lol). By the way after dyno 410 hp at tires. Thanks Edelbrock.

Stu Andrews
Location: Newcastle, Australia
Edelbrock Parts Installed: Edelbrock Performer Crate Motor
HP and TQ: 410HP
Testimonial: I bought this 68 Camaro from the US in 2008, and shipped it to Australia.where i did the body work and painted it myself in the shed at home,it 2pack balck with silver rally stripes,the moter is a 410Hp perfomer crate engine, which is just a great moter good on gas and plenty of power.

David Ortiz
Location: Guaynabo, Puerto Rico
Edelbrock Parts Installed: Edelbrock Performer Carb 1404, Performer Intake Manifolds 2111, Edelbrock Pro-Flo Series Air Cleaners 1002
HP and TQ:
Testimonial: Greats Parts its my second swap project with Edelbrock, I don't Change with any other!!!

Roland Lencioni
Location: Silverthorne, CO.
Edelbrock Parts Installed: Edelbrock Rpm Heads, Pushrods, Head bolts, Ceramic Coated Shorty Headers
HP and TQ: 600HP
Testimonial: I have always wanted a set of your aluminum heads for a project vehicle and they are great I ve had them for the last 4 yrs and not a single problem so far I will always look for edelbrock products first before buying a competitors product thx for great products keep up the good work.

Adam Pratt
Location: Boardman, OH.
Edelbrock Parts Installed: Edelbrock Valve Covers, Intake, Cam, 1405 Performer Carburator
HP and TQ:
Testimonial: After running another man. carb, I switched to the Edelbrock 1405 Carburetor. INSTANT increase in performance!

Terry Lee Richards
Location: Imperial Beach, CA.
Edelbrock Parts Installed: Edelbrock Water Pump, and Shorty Headers
HP and TQ:
Testimonial: I have had this truck for 20 yrs, when i was taking care of my mom 24/7 (no longer with us). With all the things I did for her, I needed to do something for myself, and this is what came of that. 1985 Chevy. Silverado. 250, with a700R from Bowtie, and a nice Poss rearend.

Wyat Larson
Location:
Edelbrock Parts Installed: Edelbrock Performer 460 Manifold
HP and TQ: 390 HP / 500 TQ
Testimonial: 1971 ford custom bronco. 460 ford big block. 390 hp, 500 ft lbs of torque. edelbrock performer 460 manifold. c-6 transmision.

Cameron Mims
Location: Jacksonville, FL
Edelbrock Parts Installed: 1406 Carburetor
HP and TQ:
Testimonial: I'm going to beef up and economize my 81 chevy caprice with the pro-flo xt system.

Gregorio Lonewolf
Location: San Francisco, CA
Edelbrock Parts Installed: High-Flo T.P.I. System Base Plate & Runners #3890, Hydraulic Roller Camshaft Kit #22096
HP and TQ: 325 HP / 345 TQ
Testimonial: Since 1965 and my 1st car, a 1965 Chevelle 283 bored 30 over running 400 hp, I have been a faithful Edelbrock customer. Over these many years Edelbrock has provided me with exactly what I need for performance. Whether it is intake manifolds, cams or carbs, Edelbrock has satified all of my performance needs. Since my 1st Corvette in 1970 to my 1973 and now my 1987 Corvette, Edelbrock is the choice.

Scott Morrison
Location: Brandon, SD
Edelbrock Parts Installed: Dual carbs with Edelbrock Performer Intake, Fuel Line and Throttle Linkage
HP and TQ: 400 HP / 394 TQ
Testimonial: Excellent products, easy to tune and care for.

Grabiak Performance Center
Location: New Alexandria, PA
Edelbrock Parts Installed: E Force Supercharger
HP and TQ:
Testimonial: From start to finish, the E Force Supercharger install was beyond our expectations. Very detailed instructions and helpful tech support. With the look and performance, you can't go wrong!

Mike Conley Jr.
Location: Trenton, OH
Edelbrock Parts Installed: Water pump, Multi-point fuel injection kit, Aluminum E-tec Heads
HP and TQ: 500 HP 420 TQ
Testimonial: I have a 1993 GMC Sierra SLX. It has a fiberglass 53 nose and a custom fabrictaed 53 bed. The engine is a ZZ4 350 bored .030 over. Multi-point fuel injection system. Late style one peice serpentine bracket. Edelbrock reverse flow water pump, with a mild cam. The heads are aluminum E-tec heads. I will continue to buy strictly from Edelbrock for my performance parts.

Jacob Lafemina
Location: Lake Worth, FL
Edelbrock Parts Installed: #3776 #1406 #4495 #4410 #1002
HP and TQ: 240 TQ
Testimonial: im a 16 year old high school student in the automotive program and i have a 1976 dodge charger daytona that ive been restoring for almost a year now and wwhenever ive looked for serious performance ive gone to edelbrock because i know they have it!

Michael Wimpey
Location: Hopkinsville , KY
Edelbrock Parts Installed: Edelbrock Heads, Intake, Carb
HP and TQ: 350 HP 395 TQ
Testimonial: I swore 10 years ago i was done restoring cars but after finding this 78 camaro just sitting in a barn I just couldnt resist, body is cexcellent but of corse vthe interior is trashed the real shining star on it is someone transplanted a 302dz in it.

Dennis E. Sampson
Location: Houston, TX
Edelbrock Parts Installed: Edelbrock Heads, Intake, Carb
HP and TQ: 410 HP
Testimonial: Took 5 years to complete. $70,000 in complete frame off.

Elliot Lasky
Location: Woodmere, NY
Edelbrock Parts Installed: Edelbrock Performer Intake Manifold, 750cfm Performer Carb
HP and TQ:
Testimonial: Always wanted to rebuild a car and finally have the chance... I bought a 78 Trans Am last year and buy new parts for it when i have the extra cash. Love Edelbrock parts and the wide variety they have. would buy them all if I had the money.

Ed Liegis
Location:
Edelbrock Parts Installed: Edelbrock E-Force Supercharger
HP and TQ: 464 RWHP 455 RWTQ
Testimonial: I have been showing the car and have had lots of interest in the car. A lot of folks have asked if the blower came as a factory option. I chose your product as I felt that as a total package it gave great performance while also giving the engine compartment a great look! When you look at the picture of the engine compartment you will be able to see what I was referring to as per the harness coming off of the mass air. Do you folks build a strut brace yet that will fit between the stock hood and the blower? It has not been to the drag strip since we finished putting it together. I am hoping that the car will run in the 11's.

Jim Wilson
Location: Dallas, TX
Edelbrock Parts Installed: Air Gap intake, Black Nascar style, Edelbrock Racing valve covers in black
HP and TQ: 450 HP 325 TQ
Testimonial: I have used Edelbrock products for many years and have always been very satisfied with the looks and performance. I have just swapped my Victor Jr intake for the RPM Air Gap Black Nascar style with the matching Edelbrock Racing valve covers also in black as my block, heads, oil pan, water outlet etc.

Clint Palmquist
Location: Whispering Pines, NC
Edelbrock Parts Installed: Edelbrock SDT Muffler
HP and TQ:
Testimonial: I just installed an Edelbrock SDT Muffler on my '04 Nissan Frontier and I absolutely love it! I never thought my gutless little 3.3L V6 could sound so good. Nice, deep, agressive tone and my butt dyno said I gained a little in the pony department. too. Needless to say I am going to buy a pair of these mufflers to go my on 383-powered Volvo street rod. Thanks for a great product!

Ed Langevin
Location: Va Beach, VA
Edelbrock Parts Installed: Gear Drive, Pro-Flo2 EFI, Performer Rpm Heads, Performer RPM Flat Tappet Cam
HP and TQ: 460 HP 460 TQ
Testimonial: I have always been a huge edelbrock supporter. I tell All my customers you just can't go wrong with proven performance. I have installed all kinds of Edelbrock kits. Includeing the turbo kit for the 1.6l civics. If you want the best proven reliability and performance there is only one name EDELBROCK!

Wes Langley
Location: Guttenberg , IA
Edelbrock Parts Installed: Edelbrock Intake Manifold
HP and TQ: 345 HP 500 TQ
Testimonial:

Tristen Burris
Location: Kodiak, AK
Edelbrock Parts Installed: Performer Carb and Intake
HP and TQ: 215 HP
Testimonial: Living in Alaska we sometimes race in the mud and even ice at times. Since installing my Edelbrock carb and intake the old "Hell Camino" has more torque and throttle response, enough so that we made a flag holder in the side of the car. From now on it's nothing but Edelbrock for my car.

Thomas Becker
Location: Hesperia, CA
Edelbrock Parts Installed: Performer Intake Valve Covers
HP and TQ: 255 HP, 355 TQ
Testimonial: 1967 Chevy G-20 van found in a guys back yard... was used as a storage shed for 15 year. It has a 1975 350cu 292 heads, turbo 400 trans, new front end. Went through the entire car to find mice droppings and spiders. This baby does wheelies. I want one of your edelbrock Carbs, later on for sure.

Kelvin Baker
Location: Granby, MD
Edelbrock Parts Installed: Performer Intake and 1407 Carburetor
HP and TQ:
Testimonial: I bought this car when i was 15 years old i have had it 29 years i took my drivers test in it so it has been with me for awhile and is part of me..i have not been able to work on the car for years due to raising kids and then a oilfield accident and divorce but now i am back at it and hoping to get started on it again.it has a long ways to go but it will get there someday.

Barry Dawson
Location: Jackson, TN
Edelbrock Parts Installed: Performer Intake and 1407 Carburetor
HP and TQ:
Testimonial: I been working on the ford econoline for 4 years and still not finished.just installed all my edelbrock last month.

Andrew Petit
Location: Lima, OH.
Edelbrock Parts Installed: RPM Air Gap Intake and Performer 600 carb
HP and TQ:
Testimonial: Was V6 Dakota originally, My college buddies and I swapped in a 318, installed a .540 lift cam, the intake, carb, headers, and MSD ignition. Most of the work was done in class while attending the University of Northwestern Ohio, including the custom roll pan and traction bars. Its a work in progress, but its fun.

Thomas Geubbels
Location: Netherlands
Edelbrock Parts Installed: Performer EPS Intake, Performer RPM Heads
HP and TQ: 350 HP
Testimonial: Just getting started with my chevy '51 pick up ..but disaster struck ..got a piece of broken of metal in my cilinder!! saving up for performer heads for my new block. By the way... the original straight-6 has been swapped out to a 350 v8.

Lary McCormick
Location: Herscher, IL.
Edelbrock Parts Installed: Carburetor, Intake, Cam, Lifter
HP and TQ:
Testimonial:

Kirt Boeckstiegel
Location: Barnhart, MO
Edelbrock Parts Installed: Performer 1406 Carburetor
HP and TQ: 300 HP
Testimonial: Hand made trike, with 327 chevy and 350 turbo trany. Rear-end is a 2.75, capable of turning 160mph on a dyno. Completly built by owner in the basement of his home and when finished it was taken out through a 36" wide door. It's a wild ride.

Brad Sanning
Location: Coldwater, OH
Edelbrock Parts Installed: None Yet
HP and TQ: Stock
Testimonial: Bought the car out of Las Vegas last year off of ebay and had it shipped home. Saving up money from working after school to buy parts and restore it. Hopefully when the weather gets warmer I can start to work on it.

Wild Bill
Location: Helix, OR
Edelbrock Parts Installed: Numerous
HP and TQ:
Testimonial: My name is Marcy and my husband Bill, or Wild Bill own and operate a street rod shop called Holton Secret Lab LLC. Our own projects and those projects of our customers often use Edelbrock Performance Parts. Currently we are building a 1928 Dodge Coupe with a V-12 Jag Motor with an Edlebrock carborator retro fitted to a custom intake manifold. See our Youtube video, Holton Secret Lab "Jagged".

Tom Dailey
Location: Carbondale, IL
Edelbrock Parts Installed: Intake, QwikData
HP and TQ: 750 HP
Testimonial: This was the first car i bought for my son, runs 5,59 in the 1/8th.

Kerry Johnson
Location: Bainbridge Island, WA
Edelbrock Parts Installed: #1406 Performer Series 600CFM Carburetor
HP and TQ: 303 HP
Testimonial: This FE 361ci engine came stock with Holley 4 barrel .. constantly leaked with 8-10 mpg. now Edelbrock delivers 16 MPG One clean Machine! Go Edsel & Edelbrock!

Paul Faessler
Location: Cincinnati, OH
Edelbrock Parts Installed: Russell ProClassic hose
HP and TQ: 1000 RWHP, 850 RWTQ
Testimonial: We were on a tight deadline, finishing our 2010 Mustang road race car for display in the Ford Racing booth at this years Performance Racing show in Orlando, and when it came to plumbing the car we chose Russel's ProClassic system. This is the first time we used a crimp style hose system. It is a great time saver, and the results are better. It is the only hose system we will use.

Larry Dano
Location: Mountain View, CA
Edelbrock Parts Installed: Edelbrock Water Pump, Edelbrock RPM Air-Gap Intake Manifold
HP and TQ: 400 HP
Testimonial: The water pump and RPM Air-Gap manifold work perfect on my 351cid in a 1967 Mustang track car. Great quality and durability!

Rex Vader
Location: Barrhead, Alberta Canada
Edelbrock Parts Installed: RPM & Victor heads & Intake
HP and TQ:
Testimonial: Thanks! I have ran a set of RPM heads on my 440 cu.in Crysler engine for 9 years with no problems.Its a street car and runs 11.60@ 116 mph @ over 3500 air density, it weighs 3630 lbs. I installed a set of Victors & Victor intake on my 500 cu.in Chrysler and out of the box its over 650 hp. The RPM & Victors were easy to install and are reliable & powerfull. I will continue to buy Edelbrock products.

Jim Oven
Location: UK
Edelbrock Parts Installed: Edelbrock Intake Manifold, Edelbrock Pro Flo 2, Ford Boss block stroked to 347 cubic inch, Edelbrock RPM Performer cylinder heads, Edelbrock Performer RPM roller cam shaft, Edelbrock SDT chambered silencers, Edelbrock timing chain
HP and TQ:
Testimonial: Thanks you to all your tech team for helping me re-calibrate Proflow for 347 engine, really pleased will all your component.  Car now driven by my partner Marie whom I built the car for, she really like the car very much as it responds very rapidly and smoothly. She says it is a lot quicker that her Sunbeam alpine Series 3 ( 1600cc ).  The next Tiger restoration is well on the way and will certainly be using more Edelbrocks parts.

Krzysztof Gallus
Location: Lodz, Poland
Edelbrock Parts Installed: Edelbrock Carb
HP and TQ: I wish i knew it.
Testimonial: Hi guys! I have an old Chevy El Camino that i rebuild right now. The car will have a new painting, i'd love to have couple of your stickers on it, i use your car parts from a long time, and im very happy of every one of them!

Don Newman
Location: Cedar City, UT
Edelbrock Parts Installed: Performer Carb, Intake manifol, Valve covers, Air Cleaner
HP and TQ: 450 HP
Testimonial: Just a note of thanks for all the great products you produce and the info with them. I was able to produce a fantastic motor.

Anthony Favazzo
Location: Ft Myers, FL
Edelbrock Parts Installed: Performer Intake, Cam and Lifters, Fuel Pump
HP and TQ: 300 HP 330 TQ
Testimonial: I've had the best of luck with any and all edlebrock components from past and present products.

Joe Cram
Location: Houston, TX
Edelbrock Parts Installed: E-Force Supercharger
HP and TQ: 620 HP 641 TQ
Testimonial: I switched to the E-force from another Supercharger last year. It was the Best Decision I ever made on my hotrod! The Torque is unmatched by any other out there, and the fact that my 4000lb. Street car can run Low 10's and still be streetable...AWSOME.

Manfred Hluchnik
Location: Surrey, Canada
Edelbrock Parts Installed: Edelbrock intake / Carb / Air cleaner / Valve Covers
HP and TQ: 350 HP
Testimonial: 1979 Datsun 280 zx still a work in progress
Date Posted: 1-10-10

Martin Flohs
Location: Bayville, NJ
Edelbrock Parts Installed: Edelbrock 600CFM Performer Carbs
HP and TQ: 300 HP
Testimonial: What a difference your carb has made. I cruise more than race my car, the carb I had was eating gas and would not start easily. I down sized from a 750 Holley to your 600 CFM carb and now runs much smoother and has great throttle response as well as getting better gas mileage to get to those cruises. I am very happy and I may upgrade it to another 750 Edelbrock. Thanks for a great quality product.

Sean Butler
Location: Bremerton, WA
Edelbrock Parts Installed: Two Edelbrock 800CFM Performer Carbs
HP and TQ: 750 HP 650 TQ est
Testimonial: Thanks Edelbrock, you guys have always been an excellent tech resource, and I've never been dissapointed with your products.

Jason Hamada
Location: Renton, VA
Edelbrock Parts Installed: E-Force Supercharger (5 psi)
HP and TQ: 480 HP 440 TQ
Testimonial:

Matias Eric Marquez
Location: Solana Beach, CA
Edelbrock Parts Installed: None... YET!!!!!
HP and TQ:
Testimonial: I am only 13, but my mom met the Edelbrocks in high school... a long time ago. So, growing up meant that I go to the Coranado races every year. When I was young, I would hand out hats at the races, not that I still do. At the races, i always hang out at the Edelbrock trailer. I don't own a car, but when i get one, it will be a super charged Edelbrock one!

Michael Kunzman
Location: Walled Lake , MI
Edelbrock Parts Installed: Edelbrock/Musi heads #61409 and Edelbrock Super Victor intake #29270
HP and TQ: 950 HP 920 TQ
Testimonial: All Steel body 71 Nova that runs 9.36 @ 150 MPH on 10.5 tire. Have Edelbrock Musi heads with an Edelbrock super victor intake to match, along with Scat crank/rods, Mahle pistons, ARP everything and Hedman Husler hedders this is the most Consistent car I've ever raced. We raced every week this year with no issues and will always use edelbrock products in the future.

Randy Martin
Location: Lincoln, AL
Edelbrock Parts Installed: E-Force Supercharger
HP and TQ:
Testimonial: The E-Force Supercharger is great. I was able to install it myself in my basement with no problems. I've always enjoyed driving my mustang, but now it's even better. I haven't had it on a dyno yet so I don't know the exact horsepower numbers, but I know it has a very significant gain in power, and this is with the street legal kit and edelbrock-provided tune for less stress on my motor.

Paul Morton
Location: London, UK
Edelbrock Parts Installed: RPM Heads, Rolling Rockers, Valve Covers, Air Cleaner, Fuel Pump, Inlet Manifold
HP and TQ: 359 HP 347 TQ
Testimonial: The car is a 1955 Ford Zodiac running 302/c4 gearbox, heavy duty custom 9inch axle.

Robert Nilsson
Location: Stockholm, Sweden
Edelbrock Parts Installed: RPM Camshaft, Waterpump, Intake Manifold, 1411-750 cfm Carb, Fuel Pump
HP and TQ: 400-450 HP
Testimonial: Next step, RPM heads...

Oscar Trejo
Location: Mexico City, TX
Edelbrock Parts Installed: Edelbrock Valve Cover
HP and TQ: 350 HP
Testimonial: Mi auto es totalmente original y poco a poco lo he estado reormando para un mejor funcionamiento, espero me puedan ayudar a conseguir partes de mi auto y que les guste, saludosy felicitaciones a Edelbrock!!

Scott Schaaf
Location: St. Joseph, MI.
Edelbrock Parts Installed: Edelbrock Intake and 600 carb
HP and TQ: 300 HP / 350 TQ
Testimonial: 1986 GMC 1-ton, 350, 700R4, Flowmasters. 2/3 susp. drop. Amer. Racing wheels, Goodyear tires. Bought it in 1996. Took 5 years to rebuild.

Bob Antonell Sr.
Location: Warren, OH
Edelbrock Parts Installed: Edelbrock E-Force Supercharger
HP and TQ: 500 HP / 475 TQ
Testimonial: When I first saw ads on the New E-Force Supercharger I told my son this was the perfect match for my 06 Mustang GT without a lot of cutting and fitting- and it was. This was the most straight forward and easiest installations of any add-on power makers on the market today. With the 2.75 blower pulley this GT is a real pavement eater. Thanks Edelbrock Team.

Vince Rejkowski
Location: Simi Valley, CA
Edelbrock Parts Installed: E-Tec 200 Heads, Fuel Pump, Water Pump, RPM Air-Gap Manifold, 800 CFM Thunder Series AVS Carb, Elite Series Valve Covers...
HP and TQ: 465 HP / 460 TQ
Testimonial: 383 roller motor , going in my 1954 chevy Belair, with a 700r and ford nine inch rearend.

Randy Manning
Location: Mission Viejo, CA
Edelbrock Parts Installed: Classic Valve covers (60's), TR2X tunnel ram (60's), 60559 RPM Cylinder Heads, Water Pump, (2) 650cfm Thunder Series AVS Carbs, 3" SDT Mufflers, Classic Fuel Block
HP and TQ: 580 HP / 528 TQ
Testimonial: The car was built as a street and drag racer as it might have been around 1965-1970 or so. I used older Edelbrock items when I could find them from swap meets, but mixed in some newer pieces too. The tunnel ram is a TR2X rectangular port version. The curved script, finned BBC valve covers are also from the late 60's. The cylinder heads were made to look like cast iron. Car is a blast to drive!

Scott Hall
Location: Ledyard, CT
Edelbrock Parts Installed: Edelbrock Big-Victor 18-degree Heads, Spread-Port Intake & Nitrous System
HP and TQ: 1,208 HP / 939 TQ (naturally aspirated); 1,666 HP / 1,408 TQ (on Edelbrock Nitrous)
Testimonial: In the first race with my Pat Musi/Edelbrock 632 on nitrous, I ran 4 runs in a row at 200 mph and backed it up by going 5 rounds and winning the race dialing between a 6.75 and 6.77. Winning from the #1 qualifying spot shows how reliable and consistent Edelbrock systems are in the fast world of top dragster racing.

Chris Rose
Location: Aston, PA
Edelbrock Parts Installed: Edelbrock E-Force Supercharger
HP and TQ: 475 RWHP / 440 RWTQ
Testimonial: Our Customer Tim Foster came to us interested in purchasing a positive displacement supercharger for his Automatic Mustang GT. As a dealer for many of the popular blower options for his vehicle, we found the Edelbrock to be the most complete from start to finish as well as the most powerful! This car made AMAZING power on the 3.25" pulley. Easily over 500RWHP if it was manual transmission equipped!

Jonathan Joseph Gaspard
Location: Victoria, TX
Edelbrock Parts Installed: Carburetor
HP and TQ: 250 HP
Testimonial: It's a stock 350 with an Edelbrock carburetor is all i know right now!

Mark Storjohann a.k.a. Sinbad
Location: West Bend, WI
Edelbrock Parts Installed: Vic Jr Intake / Vic Jr 64cc heads / Performer RPM Nitrous kit w/ RPM activator box
HP and TQ: 500 RWHP / 545 RWTQ
Testimonial: I went from a Performer RPM dual plane to the Vic Jr- that's like going from great to OMG! 1st run at 1/4 mile was a 11.5sec @ 111mph w/ 100 shot. Engine temp stayed cool. 3X long hauler for HRPT- Edelbrock parts have never caused me any headache- very reliable, very consistent. I drive it often and I drive it hard. This combination breathes amazingly well and can't wait for work day to end to cruz.

Jim D'Amore III
Location: Freehold, NJ
Edelbrock Parts Installed: Edelbrock E-Force Supercharger
HP and TQ: 632 RWHP / 607 RWTQ
Testimonial: We have seen and installed almost every Supercharger kit available for 05-09 Mustangs... the E-Force Supercharger kit has taken installation and performance to a whole new level! We performed a full dyno and track tested the E-Force on my personal 06' Mustang street car and we were amazed by the outcome- over 630 rear wheel HP, a 10.16 second ET quarter mile @ 130 MPH, and 9 sec ET's to come!

Nathan Kunzman
Location: West Bloomfield, MI
Edelbrock Parts Installed: Edelbrock E-Force Supercharger
HP and TQ: 440 RWHP / 404 RWTQ
Testimonial: The E-Force supercharger fit perfect on my 2006 mustang GT and delivered over 440 hp and over 404 lbs of torque! The car now has tremendous power and really drives like a mustang is supposed to. This has to be the best blower on the market, bar none.

Tim Week
Location: Reno, NV
Edelbrock Parts Installed: Edelbrock E-Force Supercharger
HP and TQ: 400 RWHP / 383 RWTQ
Testimonial: I chose the E-Force because of the completion of the package and its user-friendly installation... I was able to install this unit in a weekend with some help- customer support was a simple email or phone call away. I am completely satisfied!! my car has maintained its everyday drivability and affords me the power on demand that was promised. You have a customer for life!

Chris Isenblitter
Location: Lufkin, TX
Edelbrock Parts Installed: Edelbrock E-Force Supercharger
HP and TQ: 459 RWHP / 419 RWTQ
Testimonial: The Edelbrock supercharger does not disappoint. It delivers tire tearing power by the dump truck load and the kind of grin that only comes from the smell of burnt rubber. Not to mention its built and backed by one of the biggest names in the Performance Automotive aftermarket world.

Douglas Powell
Location: Burlington, WI
Edelbrock Parts Installed: Edelbrock E-Force Supercharger
HP and TQ: 422 RWHP / 394 RWTQ
Testimonial: The E-force supercharger met all my expectations including well over 400 RWHP, straight forward and relatively easy install (which was done on my own), kit completeness, and a very clean final look under the hood including the utilization of the stock air box. Being one of the first to have installed this set-up (along with having never installed a supercharger), I was amazed by the awesome support Edelbrock provided for any issue that arose during and after the install!

Ernie Nagamatsu
Location: Torrance, CA
Edelbrock Parts Installed: Edelbrock E-Force Supercharger
HP and TQ: 403 RWHP / 386 RWTQ
Testimonial: This 2009 Bulitt is my streetcar for everyday use. Down the front straight at Willow Springs Raceway is a big "Whooosh" as the supercharger comes on like gangbusters... it is a great performance product for the street and track.