Edelbrock Nitrous Electrical Components


PROGRESSIVE NITROUS CONTROLLER
The Edelbrock Nitrous Controller offers complete control over your nitrous system in a powerful yet compact package. The system utilizes pulse width modulation to regulate the amount of nitrous being delivered over a specified period of time by the nitrous and fuel solenoids. The digital display is easy to read and extremely precise, while the touch switch programming is exceptionally user-friendly. You have the ability to select and individually program the nitrous parameters that you need in order to optimize traction, control your chassis and ramp up your nitrous system safely. The end result leads to quicker ETs and lessens the risk of engine and chassis abuse. The compact controller is also great for automotive and motorcycle applications.

    Features Include:
  • Utilizes pulse width modulation to regulate the amount of nitrous being delivered over time by the solenoids
  • Select and individually program nitrous parameters to optimize traction and chassis control
  • Quicker ETs and less risk of engine and chassis abuse
  • Full digital circuitry with easy to read LCD display
  • Integrated battery voltage monitor
  • +12-volt timer output for auxiliary output such as ignition retard or additional nitrous stages
  • Single or dual ramp feature adjustable from 0 to 9.999 seconds
  • Non-volatile data memory retains your settings
  • Complete with wiring harness and manual
  • Great for automotive and motorcycle applications
  • Epoxy potted for durability
Nitrous Progressive Controller by Edelbrock
Application Emissions Part #
Progressive Nitrous Controller 71900

DIGITAL DELAY TIMER
The Digital Delay Timer is used to activate a second or third stage of nitrous at adjustable pre-set intervals. Timer activation begins when the unit receives a 12V trigger signal, such as transbrake release, and is adjustable in increments of 1/10th of a second or less.

    Features Include:
  • Used to activate a second or third stage of nitrous at adjustable preset intervals
  • Timer activation begins when the unit receives a 12V trigger signal
  • Use DIP switches to add or subtract time from 1/10th of a second to almost two minutes
  • Great for Bracket Racing
  • Can also be used to activate other electronic devices
  • Lightweight, compact design allows for mounting almost anywhere
Nitrous Digital Delay Timer by Edelbrock
Application Emissions Part #
Digital Delay Timer 71907

RELAY ASSEMBLY
Use the Edelbrock Relay Assembly as a replacement harness if you are transferring a nitrous system into a different vehicle or with many other devices which require a wide open throttle activation.
Nitrous 30 Amp Relay Assembly by Edelbrock
Application Emissions Part #
30 Amp Relay Assembly (includes switches, relay, wiring and connectors) 72270

NITROUS POWER PANEL FOR 1987-97 MUSTANGS
This Nitrous Power Panel is perfect for street or strip, this brushed aluminum power panel hides in the ashtray of your Mustang. It contains the highest quality switches available, plus high-temp TXL wire for maximum durability and performance. Fully fused and insulated.
Nitrous Power Panel (for 1987-97 Mustangs) by Edelbrock
Application Emissions Part #
Nitrous Power Panel (for 1987-97 Mustangs) 72283

MICROSWITCH & BRACKET KITS
Designed especially for Edelbrock, Barry Grant and Holley carburetors, these kits include a snap-action microswitch, mounting hardware and a CNC-machined, red anodized billet aluminum bracket. #72279 comes with a bendable universal bracket for easy installation.
Nitrous Microswitch & Bracket Kits by Edelbrock
Application Emissions Part #
Microswitch with Universal Bracket 72279
For Edelbrock Performer and Thunder Series AVS carburetors 72280
For Holley 4500 Series carburetors 72281
For Holley standard-flange carburetors without choke (will not fit H.P. series) 72282
For Barry Grant Race Demon carburetors 72284
For Barry Grant King Demon carburetors 72285
Holley HP Series Bracket Kit 72277

PRESSURE DEACTIVATION SWITCH
This Pressure Deactivation Switch is adjustable from 3 to 25 psi to disengage the nitrous system once the turbo has achieved the set boost pressure level. Factory pre-set at 7 psi, this switch is ideal for hard-core racing applications to prevent wheel spin and over-boost.
Nitrous Pressure Deactivation Switch (adjustable from 3-25 psi) by Edelbrock
Application Emissions Part #
Pressure Deactivation Switch (adjustable from 3-25 psi) 72209

FUEL PRESSURE SAFETY SWITCHES
Maintaining adequate fuel pressure is critical when it comes to nitrous. These fuel pressure safety switches can be used in conjunction with your nitrous systems to safeguard against inadequate fuel pressure.
Nitrous Fuel Pressure Safety Switches by Edelbrock
Application Emissions Part #
5 psi Switch 72210
7 psi Switch 72211
15 psi Switch 72212
30 psi Switch 72213
50 psi Switch 72214

TOGGLE SWITCHES
These toggle switches can be used either with your nitrous system as a replacement component or upgrade, or they can be used as stand alone items to activate other accessories you might have!
Nitrous Toggle Switches by Edelbrock
Application Emissions Part #
Lighted Toggle Switch 72271
Covered Toggle Switch 72272
Miniature Lighted Rocker Switch 72273

PUSH BUTTON SWITCH
Momentary contact push button switch can be used as a purge button or in conjunction with a microswitch to activate the nitrous system.
Nitrous Push Button Switch by Edelbrock
Application Emissions Part #
Push Button Switch 72274

Edelbrock Tech Note PRODUCT EMISSIONS GUIDE
The following guide is designed to help you determine which Edelbrock components are legal for use on your vehicle. Learn more about Edelbrock Product Emissions Guide.

    50-State Legal
    For Racing Use ONLY
    For Use on Pre-Pollution Controlled Vehicles (PPCV)
    Stock Replacement Part
    Engine Swaps