Edelbrock High Performance Fuel Pumps


PERFORMER RPM SERIES (110 GPH FUEL PUMPS)
Designed for use with all Edelbrock Carburetors used in Performer or Performer RPM applications. These high performance Street Fuel Pumps feature a high quality three stage polished finish. The unique valve design improves flow quantity and quality, and will support engines up to 600 hp. High-volume, 3/8" NPT inlet and outlet surpasses the capacity of conventional models. Produces 6 psi and does not require a regulator. For gasoline only. Clockable lower housing can be rotated for best Inlet/Outlet alignment.
Performer RPM Street Fuel Pumps by Edelbrock
Application Part #
Small-Block Chevrolet 1721
Big-Block Chevrolet 1722
Small-Block Chrysler 1720
Big-Block Chrysler 1723
289-351W Ford 1725
390-428 FE Ford 1724
429/460 Ford 1726
Pontiac V8 1713

VICTOR SERIES (130 GPH FUEL PUMPS)
A must for drag racing, circle track racing, street machines or any application that demands a high-volume fuel delivery, these fuel pumps feature a high quality three stage polished finish. High-volume 3/8" NPT inlet and outlet orifices surpass the capacity of conventional models. Produces 10 psi and must be used with an external fuel pressure regulator such as our Fuel Pressure Regulator #8190 or #1727. For gasoline only. Clockable lower housing can be rotated for best Inlet/Outlet alignment.
Victor Series Racing Fuel Pumps by Edelbrock
Application Part #
Small-Block Chevrolet 1711
Big-Block Chevrolet 1712
289-351W Ford 1715
429/460 Ford 1718

FUEL PRESSURE REGULATOR KITS
These Fuel Pressure Regulators are for Holley Standard-Flange Dual-Feed or 4500 Series Carburetors. Adjust fuel pressure from 4-1/2 to 9 psi. Match with Edelbrock racing fuel pumps. Kits include fittings, mounting plate, fuel line and regulator. Fuel line from fuel pump to regulator is not included; use #8122 or #8127 listed below.
Fuel Pressure Regulator Kits by Edelbrock
Application Part #
Single Regulator, Dual Outlet, Standard-Flange 8192
Single Regulator, Dual Outlet, 4500 Flange 8193
Single Regulator, Dual Outlet, Standard Flange w/GM Throttle 8195
Single Regulator Plate Only, Standard Flange 8189

UNIVERSAL MICRO ELECTRIC FUEL PUMPS
Edelbrock Universal Micro Electronic Fuel Pumps deliver maximum performance in a compact package. They feature a durable simple design that reduces the chance of vapor lock and flooding. Edelbrock Universal Micro Electronic Fuel Pumps are easy to install and operate quietly so you won't know its there! Includes fuel pump, filter, mounting hardware and instructions for a hassle free installation. Available for gasoline and diesel applications.

    For use with standard 12-volt negative ground systems with 1 amp draw at maximum delivery
  • Features an easy to setup 2-wire design
  • Features a gravity fed in-line, self-priming and regulating design
  • Can also be used as a lift or transfer pump
  • Designed for use with automotive and industrial applications
  • Includes filter and all of the necessary hardware for installation
Universal Micro Electric Fuel Pumps by Edelbrock
Max Flow Rate Fuel Type PSI Range Supported HP Inlet Port Outlet Port Part #
30 GPH / 114 LPH Gasoline/E85 2-3.5 325 5/16" NPT 5/16" Barb 17303
38 GPH / 144 LPH Gasoline/E85 4-7 410 5/16" NPT 5/16" Barb 17301
38 GPH / 144 LPH Diesel 4-7 410 5/16" NPT 5/16" Barb 17302
Replacement Filter Element for #17301 and #17303 (40 micron) 17311
Replacement Filter Element for #17302 (100 micron) 17312

FUEL PRESSURE REGULATORS
Fuel Pressure Regulator #8190 is for carburetor applications that require consistent pressure from 4.5 to 9 psi. It features two 3/8" NPT outlets, one 3/8" NPT inlet and is adjustable from 5 to 12 psi. This regulator is manufactured from billet aluminum and features a Nylon-reinforced nitrile diaphragm for excellent heat and leak resistance. Fuel Pressure Regulator #1789 is ideal for providing consistent pressure in Edelbrock 94 or other low pressure carburetor applications. It features two 3/8" NPT outlets, one 3/8" NPT inlet and is adjustable from 1 to 4 psi. Features a chrome finish for a great look when installed.
Fuel Pressure Regulator Kits by Edelbrock
Application Part #
Adjustable Billet Fuel Pressure Regulator (4.5 to 9 psi) 8190
Adjustable Fuel Pressure Regulator with Chrome Finish (1 to 4 psi) 1789

STAINLESS STEEL BRAIDED FUEL LINE KITS
These are for racing fuel pumps to regulator kits. Connects Edelbrock mechanical fuel pumps with 3/8" NPT outlet to Edelbrock Single-Feed or Dual-Feed Fuel Line and Filter Kits #8128, #8131, #8133, and #8134. Pre-assembled hose with hose ends.
Stainless Steel Braided Fuel Line Kits by Edelbrock
Application Part #
22" Braided Fuel Line Kit (for small-block applications) 8122
27" Braided Fuel Line Kit (for big-block applications) 8127

FUEL LINE KITS FOR EDELBROCK CARBS
Braided Stainless Steel or Edelbrock/Russell ProClassic For 110, 130 & 175 Fuel Pumps. Connects Edelbrock mechanical fuel pumps with 3/8" NPT outlet to Edelbrock Single-Feed or Dual-Feed Fuel Line and Filter Kits #8128, #8131, #8133, and #8134. Pre-assembled hose with hose ends.
Fuel Line Kits for Edelbrock Carburetors by Edelbrock
Application Stainless Black
Fuel Line Kit (For S/B Chevy, S/B Chrysler, and B/B Chrysler) 8123 81233
Fuel Line Kit (For AMC, B/B Chevy, S/B Ford, 429/460 Ford & Pontiac) 8124 81243

FUEL PRESSURE REGULATORS (CARB)
These fuel pressure regulators are machined from aircraft quality aluminum for those who demand the best. They have fluorosilicone diaphragm material for extended life and high temperature protection. Select regulators available with 1/8" NPT gauge port and a boost reference fitting for blow through or pressurized carb applications (even beyond 30 PSI of boost). Pressure regulation slope is 0.75 psi/gal of flow rate change. Will hold fuel system pressure for at least 20 minutes after pump shutdown. They are compatible with all grades of gasoline/methanol. Developed for optimum compatibility with Edelbrock Quiet-Flo fuel pumps. ALL regulators have an adjustable pressure range of 5-10 PSI.
High Performance Fuel Pressure Regulators for Carbureted Applications by Edelbrock
GPH Inlet Outlet Return Vac Port Gauge Port Red Blue Black Silver / Black
160 3/8" NPT 3/8" NPT - No Yes 174121 174122 174123 1727
160 3/8" NPT 3/8" NPT 3/8" NPT No Yes 174131 174132 174133 1778
180 -10 -10 -6 Yes Yes 174051 174052 174053 -
180 -10 -6 (x2) -8 Yes Yes - - 174103 -

HIGH-FLOW FUEL PRESSURE REGULATORS (CARB)
  • Features six -6 AN inlet/outlet ports and one -6 AN return port
  • Pressure regulation slope is .75 PSI/gal of flow rate change
  • Boost reference fitting for "blow through" or pressurized carb applications (even beyond 30 PSI of boost)
  • Supports up to 1,300 hp using gasoline or up to 650 hp using methanol
  • Can be used with low pressure nitrous oxide systems
High Performance Fuel Pressure Regulators for High-Flow Carbureted Applications by Edelbrock
GPH Inlet Outlet Return Vac Port Gauge Port Red Blue Black
180 -6 -6 -6 Yes Yes 174081 - -

CARBURETED REGULATOR SERVICE PARTS
Fuel Pressure Regulator Service Parts by Edelbrock
Application Part #
Carbureted Diaphragm & Hardware Rebuild Kit
(for use with #174051, #174052, #174053, #174081 & #174103)
178040

UNIVERSAL FUEL PUMP RELAY KIT
Universal fuel pump relay kit for use with Edelbrock #1791 and #1792 fuel pumps. Installation of this relay kit will ensure proper wiring which will reduce the risk of damaging the fuel pump and result in consistent fuel pressure.
Fuel Pump Relay Kit by Edelbrock
Application Part #
Fuel Pump Relay Kit 1795

QUIET-FLO™ ELECTRIC FUEL PUMPS (CARB)
These state-of-the-art electric fuel pumps offer maximum performance in a compact package. With anodized aluminum housings and high-quality internals, they are both strong and durable. Each pump is factory-tested and includes mounting brackets. The carbon vanes and composite rotor give these pumps the added boost for maximum performance. The high quality construction results in a pump that is 4 to 14 dB quieter than competitors' pumps at the same pressure. #1791 is factory preset to 6.5 psi and no regulator is required. With a replaceable screen type inlet filter and the free flow rate of 120 GPH it is sufficient to supply 480 hp. #1792 has a free flow rate of 160 GPH, enough to feed a 1000 hp engine. This pump is factory preset to 12 psi and requires an external regulator such as the Edelbrock regulator #1727. Warranty will be voided when used with diesel fuel.
Quiet-Flo™ Electric Fuel Pumps  for Carbureted Applications by Edelbrock
GPH PSI Inlet Outlet Ext. Regulator Req. Supported HP Red Blue Black
120 6.5 3/8" NPT 3/8" NPT No 480+ 182051 182052 1791
160 12 1/2" NPT 1/2" NPT Yes 1000+ 182061 182062 1792
Application Part #
Quiet-Flo Fuel Pump Rebuild Kit ( For use with 1791, 182051, 182052) 178050
Quiet-Flo Fuel Pump Rebuild Kit ( For use with 1792, 182061, 182062) 178060
Edelbrock Installation Note INSTALLATION NOTE: These pumps should be mounted as close to the fuel tank as possible, at or below the fuel level. For proper installation and voltage requirements, use fuel pump relay kit #1795. All fuel pumps are for gasoline only. Edelbrock offers rebuilding services for Quiet-Flo fuel pumps - call for more information.

FUEL PUMP & REGULATOR COMBOS
Edelbrock fuel pumps and Regulator kits take the guesswork out of selecting the right fuel pump and regulator combination for your application. These kits are made up of our top selling combinations for both carbureted and EFI applications.

Fuel Pump and Regulator Kit #17923 includes a Quiet-Flo fuel pump #1792 and regulator #1727. This combination flows up to 160 gph, allowing it to support up to 1,000 hp for carbureted applications. For EFI applications we have two options;

Fuel Pump and Regulator Kit #17943 which includes fuel pump #1794 and regulator #1729, as well as Fuel Pump and Regulator Kit #35943 which includes our in-line street/strip fuel pump #3594 and regulator #1728, for a combination that flows 57 gph and can support up to 600 hp.

EFI Fuel Pump & Regulator Kit (Up to 1500hp) (includes electric fuel pump #1794 & regulator #1729) by Edelbrock
Application Part #
Carbureted Fuel Pump & Regulator Kit (includes electric fuel pump #1792 & regulator #1727) 17923
EFI Fuel Pump & Regulator Kit (Up to 1500hp) (includes electric fuel pump #1794 & regulator #1729) 17943
Inline Street/Strip Fuel Pump & Regulator Kit (includes electric fuel pump #3594 & regulator #1728) 35943

INLINE STREET / STRIP ELECTRIC FUEL PUMPS
Street/Strip fuel pumps can be utilized as an inline booster pump or as a stand-alone unit. These pumps are continuous duty rated and are ideal for EFI applications that require additional pumping capabilities from upgrade modifications such as high compression pistons, high flow intake manifold, big bore throttle bodies, cams, turbo kits, supercharger and nitrous applications up to 600 HP. Includes mounting brackets, 3/8" barb fittings. Match with EFI regulator #1728 for adjustability from 35 to 90 psi.
High Performance Street/Strip Electric Fuel Pumps by Edelbrock
Application Part #
67 GPH (255 liter/hr @ 45psi), 3/8" Hose Barb Fittings 3594

QUIET-FLO™ ELECTRIC FUEL PUMPS (EFI & CARB)
These fuel pumps feature an anodized aluminum housing and high-quality internals, resulting in both a strong and durable design. The in-line design keeps the pump motor and components cool even under harsh conditions. Compatible with all grades of gasoline and methanol type fuels only. Each pump is factory-tested and includes mounting brackets.
Quiet-Flo™ Electric Fuel Pumps for EFI & Carb Applications by Edelbrock
GPH Inlet Port Outlet Port Red Blue Black
80 @ 45 psi -10 (SAE) -10 (SAE) 182031 182032 1790
120 @ 45 psi -12 (SAE) -12 (SAE) 182071 182072 1794

QUIET-FLO™ SLIM-LINE ELECTRIC FUEL PUMPS (EFI & CARB)
  • Compact design for tight locations and can be mounted inside fuel cell or external
  • Flow-thru design keeps motor and pump components cool even under harsh conditions
  • Machined from aerospace quality components
  • Compatible with all 12-15 volt systems
  • Not for use with diesel fuel
Quiet-Flo™ Slim-Line Electric Fuel Pumps for EFI & Carb Applications by Edelbrock
GPH Inlet Port Outlet Port Red Blue Black
67 @ 45 psi (12 volts) -8 -6 182081 182082 182083

FUEL PRESSURE REGULATORS (EFI)
These fuel pressure regulators are machined from aircraft quality aluminum for those who demand the best. They have a diaphragm made of fluorosilicone for extended life and high temperature protection. These regulators will hold fuel system pressure for at least 20 minutes after pump shutdown. They are compatible with all grades of gasoline/methanol. Mounting bracket, fittings and hardware are included. Each regulator features a vacuum/boost compensating port for a supercharger, turbo or intake manifold vacuum connection. ALL regulators have an adjustable pressure range of 35-90 PSI.
High Performance Fuel Pressure Regulators for EFI Applications by Edelbrock
GPH Inlet Outlet Return Vac Port Gauge Port Red Blue Black Silver / Black
180 -6 -6 -6 Yes No 174041 174042 174043 1728
180 -10 -10 -6 Yes Yes 174021 174022 174023 1729
270 -10 -10 -8 Yes Yes - - 174113 -

EFI REGULATOR SERVICE PARTS
EFI Fuel Pressure Regulator Service Parts by Edelbrock
Application Part #
EFI Diaphragm & Hardware Rebuild Kit
(for use with #1728, #1729, #174021, #174022, #174023, #174041, #714042, #174043)
178010

HIGH PERFORMANCE IN-TANK FUEL PUMP
These OE in-tank upgrade pumps are ideal for supporting performance improvements such as a high performance intake manifold, cams, turbo, direct port nitrous systems, big-bore throttle body, etc. They replace your original pump exactly and include all necessary hardware for an easy installation.
High Performance In-Tank Fuel Pumps by Edelbrock
Application Part #
FOR 1985-97 FORD MUSTANG (Except 1996-97 Cobra)
155 liter/hr. (41 gph) 17930
190 liter/hr. (50 gph) 17931
255 liter/hr. (67 gph) 17932
255 liter/hr. (67 gph), High Pressure for Turbo or Nitrous 17935
 
FOR 1985-92 FUEL-INJECTED GM VEHICLES, NON-TBI
255 liter/hr. (67 gph) 17933
 
FOR 1994-99 ACURA INTEGRA & 1992-00 HONDA CIVIC
255 liter/hr. (67 gph), 60+ psi for Turbo, Supercharger or Nitrous 17937

RAIL MOUNTED FUEL PRESSURE REGULATORS
These fuel pressure regulators feature a unique design that allows it to be mounted directly to the fuel rail, taken out the hassle of trying to find a mounting place in the engine bay. It features a compact push-in style design with a swivel style mounting bracket, so that it can be clocked in various directions to fit your setup. They are used in Edelbrock Pro-Flo 3 EFI systems and can be used with any -6 AN fuel rail.
Rail Mounted Fuel Pressure Regulators by Edelbrock
Max Flow Rate (GPH / LPH) Factory Preset Pressure (PSI) Inlet Port Outlet Port Part #
67 / 255 43 -6 -6 17400
67 / 255 58 -6 -6 17401

ALUMINUM STREET FUEL FILTERS
Fuel filters are made of billet aluminum for strength and shock resistance. The sintered-bronze 40 micron element can be cleaned or replaced. Fuel filters are designed for carbureted engines making less than 300 hp. Filters are bi-directional and available to fit 5/16" or 3/8" fuel hoses
Aluminum Street Fuel Filters by Edelbrock
Length Diameter Inlet / outlet Blue Red Chrome Black
3" 1-1/8" 5/16" 645080 645070 645060 645090
3" 1-1/8" 3/8" 8156 8139 8136 8157
Description Part #
Replacement Element 8158

FUEL PUMP BLOCK-OFF PLATES
Fuel Pump Block-Off Plates by Edelbrock
Application Part #
Fuel Pump Block-Off Plates for Small-Block Chevy 4020
Fuel Pump Block-Off Plates for Big-Block Chevy 4021

Edelbrock Tech Note TECH NOTES: Please visit www.russellperformance.com for Fuel Filters.