Edelbrock EFI Systems Customer Support & Downloads

EFI Online Forum by Edelbrock

 
PRO-FLO 2 & PRO-FLO XT SOFTWARE
Edelbrock's Pro-Flo® 2 and Pro-Flo® XT EFI software offers easy-to-use, yet sophisticated tuning control with user-friendly pull down menus and screens. Additional software features include choice of Edelbrock exclusive handheld Calibration Module (for tuning without a laptop) and new for Pro-Flo Gen-2 is the option to laptop tune also, giving you the best of both worlds! Two tuning strategies include speed density (engine speed vs. manifold absolute pressure) and alpha-N (engine speed vs. throttle position). Included are base calibrations for common AMC, Chevy, Chrysler and Ford applications. Click the link below to download Edelbrock Pro-Flo® EFI Power to Win Software.
Description File Type Download
Pro-Flo 2 and XT Power to Win Software ZIP
Pro-Flo 2 and XT USB drivers - (PROLIFIC) ZIP
Pro-Flo 2 and XT USB drivers - (IOGEAR) ZIP
Quick Start Guide PDF
Download Instructions and Firmware Version 15.0 Install ZIP
EFI Owners Manual PDF
Delphi MAP Sensors PDF
ProFlo XT Installation Manual For 3527 PDF
ProFlo XT Installation Manual For 3528 PDF
ProFlo XT Installation Manual For 3537 PDF
ProFlo XT Installation Manual For 3538 PDF
ProFlo XT Installation Manual For 35273 PDF
ProFlo XT Installation Manual For 35283 PDF
ProFlo XT Installation Manual For 35373 PDF
ProFlo 2 Installation Manual For 35000 PDF
ProFlo 2 Installation Manual For 35030 PDF
ProFlo 2 Installation Manual For 35070 PDF
ProFlo 2 Installation Manual For 35080 PDF
ProFlo 2 Installation Manual For 35090 PDF
Pro-Flo 2 Electronics Upgrade Installation Manual For 35110 PDF
Pro-Flo 2 Electronics Upgrade Installation Manual For 35130 PDF
Pro-Flo 2 EFI Installation Instructions For 35210 PDF
Pro-Flo 2 EFI Installation Instructions For 35260 PDF
Pro-Flo 2 EFI Installation Instructions For 35300 PDF
Pro-Flo 2 EFI Installation Instructions For 35310 PDF
Pro-Flo 2 EFI Installation Instructions For 35410 PDF
Pro-Flo 2 EFI Installation Instructions For 35420 PDF
Pro-Flo 2 EFI Installation Instructions For 35430 PDF
Pro-Flo EFI Installation Instructions For 35500 PDF
Pro-Flo EFI Installation Instructions For 35510 PDF
Pro-Flo 2 EFI Installation Instructions For 35520 PDF
Pro-Flo 2 EFI Installation Instructions For 35530 PDF
Pro-Flo 2 EFI Installation Instructions For 35540 PDF
Pro-Flo 2 EFI Installation Instructions For 35550 PDF
Pro-Flo 2 EFI Installation Instructions For 35560 PDF

E-STREET EFI SOFTWARE
To Install the E-Street App on the tablet: (updating from 1.00:676 to 2.00:125)
NOTE: Once the app is updated, you must update the ECU Firmware and Base Map!
For a more detailed update guide, please download and read the E-Street EFI - Tablet Update Instructions (Release #2) pdf document.

    On the tablet, download the E-Street Software (Release #2) file (.APK)
  1. Uninstall any previous version of the E-Street App Software
  2. On the Tablet, open the Android Settings
  3. Verify the following Security setting: Unknown Sources is enabled (box is check marked)
  4. Open the tablet's File Manager app. You should now see the root directory of the tablet's internal storage folders
  5. Open the Downloads folder
  6. Locate and select the EdelbrockEtuner_Release_2.apk to start the installation process
  7. When installation is complete, start the Edelbrock app and connect to your E-Street ECU
  8. Verify under Settings -> System Info menu: v2.00:125

All Base Maps and Firmware for Release #2 are automatically included with the updated app. You must update the Firmware and Base Map after upgrading to app version 2.00:125

    Updating the Firmware (only needed when updating to Release #2, v2.00:125)
  1. Open the E-Tuner app
  2. Turn Ignition Key ON (do NOT start the engine!)
  3. Connect with the E-Street ECU. Make sure the tablet is held in close range to the ECU when the firmware is flashed

    Note: Flashing firmware can potentially corrupt the ECU if Bluetooth connectivity is lost. Please contact Edelbrock Tech Support if you need assistance with loading the firmware

  4. Go to Vehicle Settings -> ECU/Map Settings
  5. Read and accept the popup warnings
  6. Select the firmware file (R1z_ECU_v2.hex) that is listed
  7. Make sure your Tablet is connected and is in close-range with the ECU
  8. Press "Load" to start flashing the firmware
  9. When the firmware finishes loading, turn the Ignition Key OFF for 10 seconds, then back ON
  10. Press Finish to return to the ECU/Map settings menu, and allow E-Tuner to re-connect

    Updating the Base Map: (mandatory update for Release #2, 2.00:125)

    These remaining steps will assume you know the correct map to update your ECU with. To check which map number you should be loading, go to your "Settings -> System Info" menu and write down the map number shown. If you do not have a map loaded OR are not sure what your map is, please run the Setup Wizard instead.

  11. Make sure you have established Bluetooth Connectivity with the ECU
  12. Press the "Load Custom Maps"
  13. Press the checkmark to continue, and press the button on left side of screen to access the Base Map directory.
  14. Select your map file (should be listed as 36****V2.tab) and press the "LOAD" Icon
  15. Once loading is complete, the tablet will disconnect from the ECU. Turn the Ignition key OFF for 10 seconds, then Key back ON (do not start the vehicle)
  16. Press the "FINISH" icon to return to the ECU/Map settings menu and the tablet will re-connect to the ECU
  17. Press and confirm (yes): Reset Self-Learn
  18. Press and confirm (yes): Reset ECU Modifiers

You can verify the new updates from: E-Tuner Home Menu -> Settings -> System Info menu. Your E-Street Tablet is now updated to the newest software version: 2.00:125, and your ECU should now be updated to version 2.8 with the latest "release #2" maps.

Before driving the vehicle, you must re-configure your Idle Target rpm and TPS calibration at idle, and any other Advanced Tuning setting as necessary.

Because the self-learn table was cleared, please allow sufficient driving time to let the ECU learn over your new base map.

Description File Type Download
E-Street EFI (Release #1)
E-Street EFI Installation Instructions (Release #1) PDF
E-Street EFI Tablet Update Instructions (Release #1) PDF
E-Street EFI Software (Release #1) APK
E-Street EFI Support Software 1 (Release #1) APK
E-Street EFI Support Software 2 (Release #1) APK
 
E-Street EFI (Release #2)
E-Street EFI Installation Instructions (Release #2) PDF
E-Street EFI Tablet Update Instructions (Release #2) PDF
E-Street EFI Software (Release #2) APK
 

PRO-FLO SPORTSMAN & PRO-FLO XT PLUS SOFTWARE
Edelbrock's Pro-Flo® Sportsman & Pro-Flo® XT Plus software offers easy-to-use, yet sophisticated tuning control with user-friendly pull down menus and screens. Pro-Flo XT plus provides the best of both worlds for user-friendly EFI tuning! Base calibrations are included for common Chevy applications with more coming soon for Chrysler and Ford.
Description File Type Download
Pro-Flo XT-Plus-Sportsman Software ZIP
Windows Vista and Windows 7 Driver ZIP
Pro Flo XT Plus Draft Manual PDF
Base Maps ZIP
Firmware ZIP
Sportsman / XT+ Quickstart Guide PDF

PRO-TUNER EFI SOFTWARE
Edelbrock's Pro-Tuner EFI software offers easy-to-use, yet sophisticated tuning control with user-friendly pull down menus and screens. The Pro-Tuner "Pro" USB key allows access to even more advanced features for the professional tuner.
Description File Type Download
Pro-Tuner Software Version 2.1.0 EXE
E-Street Crate Engine Calibration hCal
Pro-Tuner Quick Start Guide PDF
2nd MAF Sensor Wiring Diagram JPG
External Baro Sensor Wiring Diagram JPG
3670 - Victor Wiring Diagram JPG
3690 - Super Victor Wiring Diagram JPG

Edelbrock Tech Note TECH NOTE: For tech support call the toll-free Edelbrock Tech Line at 1-800-416-8628.