Victor 15° Cylinder Heads For S/B Ford

Victor 15° Cylinder Heads For S/B Ford by Edelbrock
  • Cylinder Head Specifications:
  • Combustion chamber volume: 47cc
  • Intake runner volume: 240cc
  • Exhaust runner volume: 80cc
  • Intake valve diameter: 2.125" (rec.) NOT included
  • Exhaust valve diameter: 1.625" (rec.) NOT included
  • Valve stem diameter: 11/32"
  • Valve guides: Manganese bronze
  • Deck thickness: 5/8"
  • Valve spring diameter: N/A
  • Valve spring maximum lift: N/A
  • Rocker stud: N/A
  • Guideplate: N/A
  • Pushrod diameter: N/A
  • Valve angle: 15°
  • Exhaust port location: 2.5" spread; raised .520"
  • Spark plug fitment: 14mm x 3/4 reach, gasket seat
This cylinder head is designed for maximum effort competition racing on 289 - 351+ cubic inch based engines. The inline valve configuration features a 15° valve angle and a modern combustion chamber design allows for high compression without large piston domes. The intake ports are raised .380"; however the intake flange has been extended to maintain proper port alignment with standard intake manifolds. The exhaust ports are patterned with a 2.50" spacing and raised .520" for high flow potential. This head requires shaft mounted rockers; please contact Jesel or T&D for details. Features include 47cc combustion chambers, ductile iron interlocking valve seats, manganese-bronze valve guides and requires professional preparation. Edelbrock recommends 2.125" intake valves and 1.625" exhaust valves with 5.45" overall length.
  Bare (Single)
Application Dyno Emissions Satin
Semi-finished (requires professional work) - 77219
End Seal Spacers 2 pair required for Victor Ford heads - 7726
Edelbrock Installation Note INSTALLATION NOTE: This head requires the use of a 14mm x 3/4" reach, flat gasket spark plug with a heat range appropriate to your application. Deck thickness: 5/8".
Edelbrock Tech Note TECH NOTE: Please view Cylinder Head Flow Data and Valve Springs & Retainers for all Edelbrock Performance Aluminum Cylinder Heads.
The following guide is designed to help you determine which Edelbrock components are legal for use on your vehicle. Learn more about Edelbrock Product Emissions Guide.

    50-State Legal
    For Racing Use ONLY
    For Use on Pre-Pollution Controlled Vehicles (PPCV)
    Stock Replacement Part
    Engine Swaps