NHRA Approved Performer RPM Cylinder Heads For Ford FE

NHRA Approved Performer RPM Cylinder Heads for Ford FE by Edelbrock
  • Cylinder Head Specifications:
  • Combustion chamber volume: 72cc / 76cc
  • Intake runner volume: 170cc (A)
  • Exhaust runner volume: 125cc
  • Intake valve diameter: 2.03" & 2.09" (rec.)
  • Exhaust valve diameter: 1.55" & 1.66" (rec.)
  • Valve stem diameter: 3/8"
  • Valve guides: Manganese bronze
  • Deck thickness: 5/8"
  • Valve spring diameter: N/A
  • Valve spring maximum lift: N/A
  • Rocker stud: N/A
  • Guideplate: Hardened steel
  • Pushrod diameter: 3/8"
  • Valve angle: 13°
  • Exhaust port location: Stock
  • Spark plug fitment: 14mm x 3/4 reach, gasket seat
  • Direct bolt-on heads for 1961-76 390-427-428 Fords
  • 428 Cobra Jet-sized valves promote excellent flow for streetable power
  • #60089 can be machined to accept 2.19" intake and 1.73" exhaust valves
  • Rocker shaft stud kit #6009 provides better rocker shaft retention and is highly recommended for use with Edelbrock FE heads. It eliminates wearing of the threads and the possibility of bottoming the rocker shaft bolts in the head.
  Bare (Single)
Application Dyno Emissions Satin
Ford FE 390 V8 Performer RPM for NHRA Stock / Super Stock - 60057
Ford FE 428 V8 Low Riser/Medium Riser Performer RPM for NHRA Stock / Super Stock - 60058
Ford FE 427 V8 Low Riser/Medium Riser Performer RPM for NHRA Super Stock Only - 60087
Ford FE 390-428 V8 Performer RPM for NHRA Super Stock Only - 61857
Rocker shaft stud kit for all Edelbrock FE heads - - 6009
Edelbrock Installation Note INSTALLATION NOTE: Match with Edelbrock head gasket sets. 76cc heads have vertical bolt pattern only, 390 GT exhaust will not fit. Bare heads will have valve guides and seats installed, but will require final sizing and a valve job to match the valves you will be using. Recommended spark plugs are Champion RC12YC or equivalent 14mm x 3/4" reach with flat gasket seat. Deck thickness: 5/8".

( A ) CC values are projected if using Edelbrock valves, and equivalent valve job and bowl blend

Edelbrock Tech Note TECH NOTE: Please view Cylinder Head Flow Data and Valve Springs & Retainers for all Edelbrock Performance Aluminum Cylinder Heads.
The following guide is designed to help you determine which Edelbrock components are legal for use on your vehicle. Learn more about Edelbrock Product Emissions Guide.

    50-State Legal
    For Racing Use ONLY
    For Use on Pre-Pollution Controlled Vehicles (PPCV)
    Stock Replacement Part
    Engine Swaps